04/05 Spindle on a 06

[BeltSlipper]

What is the plus to putting 04/05 Spindles on an 06? Is there a big advantage?

[BadinBlack]

better turning and handling only disadvantage is you have to get 04/05 arms which will cost you some more money.

All you need is upper a-arms. The lower are the same.

[BeltSlipper]

OH heck, didn't even think about that. Thanks for the information.
Maybe you could help me with my delima, I'm trying to get my sons front end to 50", thought different spindles would help. So how do I accomplish this?
As of right now, we have +2 Laeger LT and stock off-set rims.

[BadinBlack]

Originally posted by BeltSlipper
OH heck, didn't even think about that. Thanks for the information.
Maybe you could help me with my delima, I'm trying to get my sons front end to 50", thought different spindles would help. So how do I accomplish this?
As of right now, we have +2 Laeger LT and stock off-set rims.
how wide is it now?

[BeltSlipper]

48" when compressed.

[BadinBlack]

having some wheels +1 out from what you have will be the easiest and cheapest way to go about it IMO

[BeltSlipper]

Originally posted by BadinBlack
having some wheels +1 out from what you have will be the easiest and cheapest way to go about it IMO

We have stock off-set of 3/2, if I'm not mistaken. And if we go with a 2/3 won't that mess with the handling? I don't want to make it harder on my son that it already is.

[MX450]

stock offset is acctually 4/1.5, the stock wheels are 5.5in wide, if you get a set of 3/2 offset you should be fine, the 05 spindles only give you better handling, they wont make it wider.

[BeltSlipper]

Well good god, I feel like an idiot in here. I didn't know the stock was that off set. Thanks for the info. I will order a set of 3/2 off set and call it good.

Thanks guys for all the great info

[MX450]

dont worry, i thought stock was 3/2 too till i found out online