PDA

View Full Version : 426


whitebros400
05-07-2008, 02:19 PM
what would be a good brand for a 426 bore kit.:confused:
Phillburt57
05-08-2008, 01:35 PM
What's your definition of goo brand? Are you talking about pistons? Sleeves?
whitebros400
05-08-2008, 03:59 PM
pistons should i go with weisco or je
Phillburt57
05-09-2008, 11:48 AM
You will get mixed answers. Half will say Wiseco and the others will say JE. I have heard nothing but good things from Wiseco owners so that is what I decided to use for mine.
jak1389
05-09-2008, 02:33 PM
ive had both. go je
Honda#4
05-09-2008, 08:17 PM
go je


X2
coryatver
05-10-2008, 07:35 AM
if you going 426 you should re sleeve it. The stock sleeve is to thin when you bore to 426 and can crack or other problems
jak1389
05-10-2008, 11:07 AM
you dont need to resleeve it. its kinda a wasted to have the cylinder bored to put a bigger sleeve in just to run a 426. just run it in stock sleeve
05-10-2008, 11:18 AM
Originally posted by jak1389
ive had both. go je

why is that? I am very interested to know why JE is better.
coryatver
05-10-2008, 11:29 AM
Originally posted by jak1389
you dont need to resleeve it. its kinda a wasted to have the cylinder bored to put a bigger sleeve in just to run a 426. just run it in stock sleeve

it is not a waste the stock sleeve is to thin with a 426 bore and is unreliable
TRXRacer1
05-11-2008, 05:10 PM
Originally posted by coryatver
it is not a waste the stock sleeve is to thin with a 426 bore and is unreliable I have yet to see this problem with a 426 in a stock sleeve.

As far as pistons go, get the cheaper of the two because you won't see a power difference worth going out of your way for.