aftermarket pegs?

[250Ronny]

anyone know where to find them?

[deathman53]

Ims used to sell them. I bet you can find them on ebay.

[danhung11]

I want to say atv galaxy has some old stock.

I have some custom made Walsh Racecraft pegs for a 87 frame that I would let go.

In my opinion, the are stronger than IMS.

[troybilt]

Originally posted by 250Ronny
anyone know where to find them?

I was wondering the same thing. I saved an ebay item on my watch list of some IMS pegs from ATV GALAXY, show they never sold. I went and searched their store and couldn't find them. I would like a set for an 89 frame. I thought about designing my own, if I can't find them.

[troybilt]

Search this number in ebay: 120175839046

You might send the seller a question and see if they have any left.

[havinnoj]

RIS Designs makes some nice billet ones.

[deathman53]

keep in mind, RIS pegs are clearly stated that they aren't for use with jumping, only tt/flat track. They are aluminuim and not steel like the ims/roll pegs. With the ims/roll pegs I have and being used for jumping, I didn't have a problem with hurting the pegs, I was bending and wearing away the peg plates themselves. I bent and wore away enough of 3 stock peg plates to render them useless(keep in mind these weren't trx250r peg plates, but 86 atc250r and 200x peg plates(now both discontinued)).

[TheNewn]

I bought some IMS (non kick up) pegs a while ago for my 88 off of ebay. Got a decent deal on them.

You can probably still find them there.

[troybilt]

Here the RIS pegs. Save you the trouble. look sweet, but don't look like a pro-peg. Also, the ones they show in the picture don't look like they work on an 88-89 frame.

[havinnoj]

Originally posted by deathman53
keep in mind, RIS pegs are clearly stated that they aren't for use with jumping, only tt/flat track. They are aluminuim and not steel like the ims/roll pegs.

I don't doubt it, but where is this stated?


Originally posted by troybilt
Also, the ones they show in the picture don't look like they work on an 88-89 frame.

They also make 88-89.

[250Renvy]

If you can't find any, your best bet is to make your own - either custom from a fabricator or weld two sets of pegs together and find the kickup extensions on ebay and weld them on then paint or powdercoat them your choice.

[Aceman]

The RIS pegs look nice but don't seem very practical. Aluminum teeth on a footpeg doesn't seem like a good combination to me. It appears the footpeg is removable though, so you might be able to replace just that part when it wears out.

I'd keep watching Ebay for some Roll pegs.

[TheNewn]

Another option could be to just get some AC nerfs with the built in pro pegs...

go on ebay type ims 250r