Clutch Lever Hard To Pull

[Misfit138]

My clutch lever is really hard to pull,how can I make it easy?

[zrpilot]

First replace the cable, they are notorious for making the clutch hard to pull.

[Rip_Tear]

keep it lubed, I use chain/cable wax. Also other levers, or a hydraulic clutch make things easy.

[eastcoastpro20]

just lube the cable, if you call your local dealer they will actually have a specific piece to help you do this, it gets tough because dust and dirt gets down in there

[f4istunna]

I agree try to lube the cable if that doesnt work try a new cable 9 out of 10 times it will help ALOT!!

[eastcoastpro20]

i had this exact problem i did what i said and it is good as new

[my88r]

mine i keep lube on it. helps alittle bit. new OEM cable cured the problem.

[400ex28]

Best bet is that you just need a new cable, just be sure to keep it lubed up.

[Ruby Soho]

lube it or get a new cable

mine was pretty hard for awile then i lubed it alittle and put on a MSR lever/perch and it made things alot easier.

[TURBO-530R]

also check to see if the cable is melted by the header if so replace and make sure it goes back in the cable guide in the front righ t side of motor hope this helps

[TURBO-530R]

also check to see if the cable is melted by the header if so replace and make sure it goes back in the cable guide in the front righ t side of motor hope this helps

[TURBO-530R]

also check to see if the cable is melted by the header if so replace and make sure it goes back in the cable guide in the front righ t side of motor hope this helps