PDA

View Full Version : 1983 Kdx 80?'s



REDRIDDER
04-30-2008, 07:24 AM
What is the gas + oil ratio anyone know for sure? thanks again. also does anyone know were i can find a good price on a cylinder?

my88r
04-30-2008, 01:13 PM
Originally posted by REDRIDDER
What is the gas + oil ratio anyone know for sure? thanks again. also does anyone know were i can find a good price on a cylinder?

I'm sure 50:1 amsoil dominator would be fine. for the cylinder ebay. i dont think you can get new oem back that far.

REDRIDDER
04-30-2008, 01:31 PM
thanks for your response so 50:1 and you can get every part you'll ever need at service honda.com the cylinder is $259 bucks.im going to send you a pm my88r check it out.

my88r
04-30-2008, 01:37 PM
Originally posted by REDRIDDER
thanks for your response so 50:1 and you can get every part you'll ever need at service honda.com the cylinder is $259 bucks.im going to send you a pm my88r check it out.

yep, that dominator is made to run at 50:1. i use it in all of my 2 strokes.

REDRIDDER
04-30-2008, 01:44 PM
thanks a bunch :)

KXRida
05-01-2008, 06:34 AM
I never run anything higher than 40:1, even dominator. For my 80's and 125's it was strictly 32:1, anything bigger was 40:1.

trxwannbe
05-01-2008, 06:36 AM
yeah don't think i've ever seen anything run at 50:1 my blaster was always 32:1

REDRIDDER
05-01-2008, 07:43 AM
i was thinking that 40:1 or 32:1 sounded good.

my88r
05-01-2008, 12:41 PM
if your going to run amsoil dominator. run it at 50:1 as it was formulated to do.

KXRida
05-01-2008, 02:52 PM
most oils will say you can run them up to 50:1. Never will any of my 2 strokes ever see 50:1. Dominator or not.

my88r
05-01-2008, 03:02 PM
time to do some homework on 2 storkes.:)

KXRida
05-02-2008, 04:34 AM
Originally posted by my88r
time to do some homework on 2 storkes.:)


Yah... don't run them at 50:1! :D

my88r
05-02-2008, 10:41 AM
Originally posted by KXRida
Yah... don't run them at 50:1! :D

whats your reason then:)

KXRida
05-02-2008, 11:03 AM
for a high constantly high revving small bore engine (such as an 83 kdx 80) 50:1 is not a sufficient amount of oil. Jet for 32:1 and you'll be fine. The only thing I run 50:1 is the weed eater.

my88r
05-02-2008, 11:09 AM
Originally posted by KXRida
for a high constantly high revving small bore engine (such as an 83 kdx 80) 50:1 is not a sufficient amount of oil. Jet for 32:1 and you'll be fine. The only thing I run 50:1 is the weed eater.


i will let you know how my 200 does at 50:1 also my 250r.which have been running at 50:1 for sometime now:macho

KXRida
05-02-2008, 11:33 AM
That's fine and I can tell you how all of my 85's were at 32:1, all my 125's were at 32:1, how my 200's were at 40:1 and how my 250's were at 40:1 lol.

:eek2:

I'll keep you posted on the weedeater at 50:1 :p

my88r
05-02-2008, 11:42 AM
lmfao:rolleyes: