Getting Closer

[#404's Dad]

Getting closer to having these lil boogers done, here is a pic of one of the two, both are identical twins with one a few minor differences.

Still have plenty to do and only a couple days to do it lol.

http://img.photobucket.com/albums/v337/sidewaze79z/1ofTrevors08DRR50s.jpg

[Logan #34's Dad]

Hey Corey, Looks good! I noticed you did not gusset the frame where the lower portion comes up and meets the upper rails. It will break there especially if your riders is aggressive or a high flier.

[quadscrib]

Here in district 14 we have "MX REVOLUTION" race team and they run the exact same color scheme....Very nice lookin!

[quadscrib]

Here in district 14 we have "MX REVOLUTION" race team and they run the exact same color scheme....Very nice lookin!

[bulldogfallon]

Looks good..Where did you get the black wheels?

[#404's Dad]

Originally posted by Logan #34's Dad
Hey Corey, Looks good! I noticed you did not gusset the frame where the lower portion comes up and meets the upper rails. It will break there especially if your riders is aggressive or a high flier.

No real jumping in TT so it should be good to go, we did not harm any frames last year but I will for sure keep an eye on them.

[#404's Dad]

Originally posted by quadscrib
Here in district 14 we have "MX REVOLUTION" race team and they run the exact same color scheme....Very nice lookin!

Yes, Brandon is a buddy of mine, I actually do work on his bikes and so on.

[#404's Dad]

Originally posted by bulldogfallon
Looks good..Where did you get the black wheels?

Gary, they are Pro Wheels from DRR ( Bent Ones I might Add ) that I drilled and had powder coated by a buddy of mine Bill @ X-Treme Powder Coating here in Ohio.

[JIM GRACE]

Are the front tires 18 or 19 inch, i have been considering swapping
the maxxis mx with holeshots 19 inch. should give the front end a little
more travel before bottoming out..

brandon's dad #55

[pnbsdad]

Looks good Corey even better when you get your graphics on it

[#404's Dad]

Originally posted by JIM GRACE
Are the front tires 18 or 19 inch, i have been considering swapping
the maxxis mx with holeshots 19 inch. should give the front end a little
more travel before bottoming out..

brandon's dad #55

The Maxxis razrs that came on it were 19 inch and these Holeshots are also 19 inch, I have not yet seen an 18 inch front tire but would be very interested in a set.

[#404's Dad]

Originally posted by pnbsdad
Looks good Corey even better when you get your graphics on it

Just walked int he door, had a buddy over to do the graphix, turned out nice, I will call ya about a few things tomorrow while i am on the road Scott.


I will have pix up soon, just forgot the camera tonight so...................

[JIM GRACE]

Originally posted by #8trx450r
The Maxxis razrs that came on it were 19 inch and these Holeshots are also 19 inch, I have not yet seen an 18 inch front tire but would be very interested in a set.

To the best of my knowledge the razr MX is an 18" tire, you might have had the razr cross tires 19" if it is a newer unit.. happy to swap:D

brandon's dad #55

[bulldogfallon]

Razr on DRR is 19 inch...posted specs are not always actual specs

Ex 18 snow hog is more like 17

Cross tire sits much higher than razr of same size

[tireman43]

Originally posted by JIM GRACE
To the best of my knowledge the razr MX is an 18" tire, you might have had the razr cross tires 19" if it is a newer unit.. happy to swap:D

brandon's dad #55

Both my daughters 90 and my son's 50 came with 19" Razr MX. They might measure 18 but they say 19 on the side.


By the way...The quad looks good Corey. The colors work very nice together.

[quadscrib]

I think that they are referring to the stock fronts on the DRX's which are 19" razrs.