330r with pwk 36?

[fly400ex]

The rod bearing went on my 265r, found a deal on a CT 330r motor, but would like to use the 36mm pwk air striker from my 265r. Will it work and does anyone have a good starting point for jetting? It has a 158 main jet and dgk needle, I ride at sea level. Any help would be appreciated!

[twisted threads]

Im sure it would work but I would get at least a 38 air striker or a 39 pwk. As for jetting...... im not sure. I run a 178 main, needle in the highest position, and a 52 pilot jet. Hope that can help ya a little.:cool:

[GOTFEAR]

36 will make short power need 38 striker

[mineralgrey01gt]

Originally posted by twisted threads
Im sure it would work but I would get at least a 38 air striker or a 39 pwk. As for jetting...... im not sure. I run a 178 main, needle in the highest position, and a 52 pilot jet. Hope that can help ya a little.:cool:

I agree 100%, I also run the same jets for south louisiana

[doc-bones]

CT330 should be 182-185 main, 52 pilot with DGH needle in middle clip. 38 or 39 PWK for sure. Best pipe would be LRD Big Bore. Sparks Big bore even better if you could get your hands on one.