hondarider101
04-27-2008, 11:22 AM
this is a how to on how to repack ure aftermarket exhaust
1: take the bolts out of the back of the exhaust that holds it together. be care full
2: pull the pipe apart. Be care full
3:Remove the old packing from the inside of the exhaust and clean the can and the piece the packing goes around good to get any build up of fried packing off'
4: After buying new packing wrap the packing around the tube and take some Scotch take and tape it at the end so it is easyer to get in. this is recomended.
5.put the can and the tube w/ the packing back inside of each other.
6.Put old bolts back in. Use a little bit of anti seaze, so the next time you repack it they will come out better.
7: screw bolts in.
8: Put it on and have fun!!
1: take the bolts out of the back of the exhaust that holds it together. be care full
2: pull the pipe apart. Be care full
3:Remove the old packing from the inside of the exhaust and clean the can and the piece the packing goes around good to get any build up of fried packing off'
4: After buying new packing wrap the packing around the tube and take some Scotch take and tape it at the end so it is easyer to get in. this is recomended.
5.put the can and the tube w/ the packing back inside of each other.
6.Put old bolts back in. Use a little bit of anti seaze, so the next time you repack it they will come out better.
7: screw bolts in.
8: Put it on and have fun!!