Anyone who has Lonestar A arms ?

[JR3]

I ordered a long travel fox float LSR set up brand new. Got it everything looks nice etc. on the lsr lower a arms there are already nylon bushings in there so do i just use the stock like cap washer type things that go over each side of the a arm thats how my dentons were this is the same correct.

thanks James

[the Z Man]

I don't believe so, I think you just use the bushings and sleeves, thats how mine are but I have honda ones.

[JR3]

yea the yfz ones are totally diffrent. Thats how it was on my 450r to thats why im making sure with these. because there is no sleve just the bushings that are in it and says use the stock hardware and my denton had the caps on it and with out the caps the bolt moves all around. i guess the caps act as the sleeve.

[660LE]

use the stock steel sleeves and dust caps from your stock a-arms.

[JR3]

are u sure about this ive never had stock a arms. Can someone anwser me that has put long travell LSR a arms on there yfz.

[hskers82]

I have the long travel XC a arms and just like 660LE said on the lower arms you have to use the steel sleeves and the dust caps from your stock a arms

[JR3]

ok thanks everyone this lil detail just had me baffled.

Thanks James