416ex

[Kennethyfz450]

My wife and I put over 150hrs on this atv. (we will still ride it until it sells)

Needs :
Fender latch - If you jump any doubles the seat will fly off.
Steering Stem Bushings
Front tires

Damaged :
Lower left a-arm
front/rear plastic
factory heel guards have some scratches
Grab Bar

Has:
Douglass Wheels red label-(I will double check to be sure)
White Brothers full Exhaust
AC Nerfs
R.O.C.K front bumper (first one i've seen- came with the bike.)

I'm going to start by asking 2000.00. I will repair the steering stem busing , and try to find a aftermarket latch.

I will accept partial trades, but more interested selling out right. I bought the quad from a member on this site. (guitarfan)

I do not have any pictures on my hard drive. This bike has a lot of potential.

[Kennethyfz450]

I forgot to mention that it's a 2002 400ex.

[DuwBra]

How bad is the a-arm damaged, and how does it run? Is it in good shape? Power?

[KB Motorsports]

I've been riding the 400ex for the past couple weeks, and really haven't found too much wrong with it. I feel that its pretty strong for an EX, but it could always be improved.

The a-arm damage is more cosmetic then anything. No one notices it's bent until I point it out.

The frame is in good shape, but the grab bar on the subframe is bent and has been welded up by the previous owner. (does the weld job look good? no)

Being 6 years old i'd consider it in decent shape. All the bearings are still good (swinger, carrier, and front wheels)

If you have anymore questions let me know.