banshee jets

[ltl666devil]

my banshee has toomey t5 pipe/silencer .30 over, ported and polished, boyseen reeds and a hotrod crank. im havin a ard time doing my jets and needle position if some1 can help me out

[Dinner]

So you have T5's, Boyesen Reeds and a port and polish. What type of porting do you have done on your cylinders?

What is your air temperature, elevation above seal level and your current jetting right now?

Generally with the T5's and Boyesen Reeds that should put you close to mmm 270ish with the stock airbox and lid (also depends on air temp and elevation). With the porting, depending on how much fuel it demands it could require anywhere from 300-380 main.

The needle position is for more "fine tuning" the carb for when you are doing plug chops. But for now we need to know your elevation, air temp, what type of porting, and just curious as to what type of air box you are running?