PDA

View Full Version : Scrambler 400 splines



kargaaro
04-16-2008, 11:09 AM
Does anyone know if the splines for the rear hubs are the same on all polaris quads? I would like to use predator hubs on my 2000 Scrambler 400 4X4 to change the bolt pattern.

rundrave
04-16-2008, 11:17 AM
yes the predator hubs will swap over, but they will take a little bit of grinding to fit perfect. You have to grind some off the back of the hub so you can get the castle nuts on with the cotter key.

the 03 pred had 4/156 bolt pattern (same as the scrambler fronts)

and 04 and higher had 4/110 bolt pattern

i have the 03 pred hubs on my 04 scrambler so I could get some better wheels because there are not many aftermarket wheels that fit the stock 4/4 pattern on the scramblers

you should come check out www.gen3usa.com that website is all about scramblers, trailblazers and 400 sports

kargaaro
04-16-2008, 11:37 AM
Great news. Thanks for the help. I have stacks of honda wheels and tires around here and would like to put a set on it. Looks like I'll need 04 or newer predator hubs and they should swap right over.

kargaaro
04-17-2008, 11:36 AM
Well apparently they're hard to find. You don't know if honda hubs will fit do you?

rundrave
04-17-2008, 01:45 PM
yeah i had to look for a bit before I found some. I actually found some on this site. You could also check the predatorowners or ebay.

I got mine for really cheap, just have to do some looking.

Motoracer13
07-26-2008, 06:36 PM
Does it normally take awhile to get the email comformation for the gen3 website? Trying to get onto the forums there.

gen3usa
10-15-2008, 09:41 PM
you need to make sure you include your city/state in your profile or they wont let you in, they keep it clean of spammers that way! if you need reregister and include the needed and your in!