Bnashee Quad of the month

[TheFontMaster]

This month's Quad of the Month will be a banshee specific QOTM. So lets see all your quads, and have another great QOTM!

http://www.exriders.com/vbb/showthread.php?s=&threadid=347083

[TheFontMaster]

BUMP come on I know there are more banshees on here than just this one!!

[TheFontMaster]

BUMP, I'm keeping the poll open for another day or 2 to try to get a few more quads to enter.

[asohagan]

here is mine, it is a 2003 se i have changed it to all black with the stock tank cover. i just put on a +4 swingarm and raptor 660 a arms, this widened it out 5.5 inches over stock with stock wheels on it. i did lose about 1 inch of ground clearance but i am working on correcting that i will post pics of the process when i am complete.

my bike is stock bore and stroke with unported cylinders, i run fmf fattys, coolhead with 17cc domes, fireball racing billet intake and 34mm pj carbs. v force reeds are soon to come!

on the dyno it spiked 52hp before blowing out the stock clutch, so i went home and installed a toomey clutch and run every other spring stock, so its not so hard to pull.

[nazztman4739]

http://i35.photobucket.com/albums/d167/95z284739/jeffs%20ride/024.jpg
4 mm stroker with .40 over pistons 30 mm carbs v force reeds 4 inch extended swingarm 2 + 1 a arms custom front bumper and nerf bars and grab bar made as spider webs
durablue axle

[Hondamaster5505]

Your a little late buddy, lol. This ended a long time ago.