PDA

View Full Version : Quick Question!


400ex_rider13
04-10-2008, 08:54 PM
I have a '04 400EX, Stock offset Douglas yellow labels front & back. I want to put Houser +2 ST A-arms up front and a +4 axle out back. Will I still be under 50" all the way around?
Pipeless416
04-10-2008, 09:08 PM
yep, i have stock rims, +2 burgards and a +4 g force axle and im about 48 or 48.5 in the front and 49 in the back.
400ex_rider13
04-11-2008, 02:17 PM
Sounds good, Thanks.
reconranger
04-11-2008, 06:22 PM
I'm running ITP Holeshot XC's (wider than stock) and ITP Baja rims (wider and greater offset than stock) which makes me right around 49".....for a way lot less money than you are going to spend on a-arms, an axle, and new shocks (you're going to have to have then with those new a-arms)....to end up at the same place!!!
BlasterEaten250
04-11-2008, 06:25 PM
Originally posted by reconranger
I'm running ITP Holeshot XC's (wider than stock) and ITP Baja rims (wider and greater offset than stock) which makes me right around 49".....for a way lot less money than you are going to spend on a-arms, an axle, and new shocks (you're going to have to have then with those new a-arms)....to end up at the same place!!! Not really, sure you are the same width, but your suspension will suck then.