Help! Valve Clearance for a Stage 2 hot cam

[Sandman69]

I know the stock clearance is .005 on the exhaust valves and .004 on the intake but does anyone know the clearance for a Stage 2 hot cam? I can't seem to find it anywhere. I have found some for the Stage 1 but that is it.

Anyone??

[lghickman21]

you should use the same clearance

[Sandman69]

Hotcams have different vavle gap clearance requirements than stock.

I know the Stage 1 is .005 and .006

[blue_ex_rider]

Originally posted by Sandman69
Hotcams have different vavle gap clearance requirements than stock.

I know the Stage 1 is .005 and .006


.005 and .006 is what you want to set them at.

[Sandman69]

Originally posted by blue_ex_rider
.005 and .006 is what you want to set them at.

Then that is what I will do...
Thanks

[Honda#4]

Here the specs

[brokenmike]

I hate to throw a wrench in the works but which stage 2 hotcam do you have? The old one uses .006 in and .008 ex. The new one uses .005 in and .006 ex

http://www.supermotors.net/getfile/624436/fullsize/scan0005.jpg

[Sandman69]

Originally posted by brokenmike
I hate to throw a wrench in the works but which stage 2 hotcam do you have? The old one uses .006 in and .008 ex. The new one uses .005 in and .006 ex

http://www.supermotors.net/getfile/624436/fullsize/scan0005.jpg

The cam is only 2 years old. I would say it is new. I appreciate all the advise everyone and will start at .005 and .006.

[REDRIDDER]

this one is a stage 1 i bought about 5 years ago.

[440exadee]

according to their website all three are the same valve clearance even my stage 3 is intake .005 exhaust .006