new clutch?!?

[BlackTrx440ex]

Hey i just got an aftermarket clutch lever and i was wondering if i can still have reverse with the aftermarket lever??? and if i can how do i do it?

[honda300EXtreme]

ok,

remove the little black plastic piece by your brake pedal,
remove the reverse cable,

theres a little actuator that the cable goes to, use a exhaust spring or a zip-tie to keep it up, or on the "on" position

reinstall the cover,

now all you need to do it put it in nuetral, pull the lever up and shift down, and your in reverse, much more simple then the stock set-up

[BlackTrx440ex]

ok thanks man, but do you have any pics so i can figure it out easily???

[big bad beny]

Yea that will look like carp. this is how i did mine.I wont have any pix till I take my clutch cover off . All I did was when u take your clutch cover off pull the shaft out that the cable goes to. After you have competed that step cut the lobe off of the shaft that will eliminate the safety catch for the reverse. Then put it all back to gather. Make shear you put the spring back one the shaft.

[Honda#4]

Trx440ex I need your full name so I can ship out ur parts, sorry to budge in like this.

[BlackTrx440ex]

i gae you my address and stuff my name is Joe Parisi and and you have everything else...