Hiper ?

[quad97]

how tight are the beadlock bolts supposed to be on a hiper wheel?

[ohsobad_chevy]

I remember someone posting 7.2 ft. pounds, but I am not 100% sure. Call hiper and they will tell you. ;)

[hornetgod13]

10 ft lbs (120 in lbs)

Do not over or under torque them or you'll have problems.

[bwamos]

Be sure to get an in-lb torque wrench, as ft-lb torque wrenches are not very accurate at 10.

Also tighten them down a bit at a time in a star pattern.

[ohsobad_chevy]

Originally posted by hornetgod13
10 ft lbs (120 in lbs)

Do not over or under torque them or you'll have problems.

Oh yeah......the valve cover bolts on my yfz are 7.2 pounds. :p

Thanks hornet

[esr250r86]

How often do you guys re-tighten the hiper beadlock bolts on the rings?

[hornetgod13]

I recheck mine every 2 to 3 months. I always find some loose.

[esr250r86]

Ok.Yeah i was unsure of how often to check em because theres so many bolts.lol.I shouldnt be lazy when it comes to these kinds of things!

[m.h.s.c.#527]

i just go till they feel tight and the ring is touching the wheel no problems