Tons of new OEM bolts needed

[ameier5051]

I need a ton of new OEM bolts / seals and whatever other petty little things you guys may have laying around. If anyone has any let me know. I basically need everything.

PM me or reply to this thread.
Thanks!

[havinnoj]

Most of my spares are original used pieces and aren't really pretty. I have a lot of stuff for a rear bearing carrier (stock).
PM me a list of other things besides nuts/bolts that you are looking for.

[matt250r21]

If you could, make a list of what you need. I have a large supply of OEM seals and rubber frame grommets. I have some OEM bolts as well, some I sold to another member already. A good supply of non OEM bolts can be found at ACE Hardware, just make sure they are grade 8 steel metric flange head or allen. I would not use stainless steel though. I know they have 6mm 1.00 pitch and 8mm 1.25 pitch bolts. For 10mm 1.25 and 12mm 1.25 pitch bolts you will need to buy OEM. I have only found 1.50 pitch thread for the larger size bolts at hardware stores.

[ameier5051]

I need.....
8 A-Arm Bolts and Nuts (possibly)
4 Bumper Bolts
1 Front Gas Tank Bolt and Collar
6 Radiator Shroud Bolts
1 Radiator Bracket Bolt
1 Upper Rear Shock Bolt
1 Upper Rear Shock Nut
2 Upper Rear Shock Seals
4 A-Arm Castle Nuts (possibly)
2 Roller Seat Grommets
4 Grab Bar Bolts
2 Side Gas Tank Bolts
4 Tie Rod End Nuts
2 Rear Master Cylinder Bolts

Any other miscellaneous bolts/seals you feel I may need...Feel free to ask....

The reason I say possibly is because I am waiting for my a-arms to arrive. They are "Supposed" to have the mounting hardware......just like they were purchased MARCH 22ND.....

[wilkin250r]

You might need actual OEM for some of the odd sizes and shapes, like tie-rod ends and castle nuts.

But for the simple, generic sizes, (like the bumper bolts side gas tank) you can just get a bolt kit, available from many online stores and race shops.

Rocky Mountain Bolt Kit (http://www.rockymountainatvmc.com/productDetail.do;jsessionid=8DE822576BEC722E98F00B 8A4AF565D1.westring1?navType=type&navTitle=Tools%2FShop&webTypeId=117&webCatId=22&stockId=136149&prodFamilyId=16412)

It's not vehicle-specific, so it doesn't contain all the custom bolts, just the general 6mm, 8mm, and 10mm. Perfect for the basic stuff like your grab bar and radiator shrouds. You don't really need OEM for those things anyways. OEM will charge you $1.09 per bolt, which isn't bad if youre only ordering 5 or 6, but it will eat you up if you're ordering 50 or 60.