Checking Interest: LoneStar 450R, Oct. QOTM

[R3Concepts]

OFFICIALLY parting out my full LSR TRX. Its been ridden 3 times in the sand, and all parts are in great shape.


Won the Oct. QOTM

Frame: LoneStar Pro Peg TRX, Wilder Red, 05 based- 2100 with nerfs, and hardware if needed.
A Arms: LoneStar DC4, +2.5+1, Wilder Red, Chrome uppers- 750
Swingarm: LoneStar +2, Chrome with TM Slider, and chain- 525
Steering Stem: LoneStar with big bar clamp- 300
Axle: LoneStar Axcalibur- 250
Carrier: LoneStar Twin Row- SOLD
Locknut: LoneStar Anti-Fade- SOLD
Hubs F|R: Stock- 50 for the fronts, 50 for the rears
Bars: Fasst Co Flexx- SOLD
Throttle/Clutch Lever: 400EX housing- 40
Bumper: AC Racing- SOLD
Grab Bar: AC Racing- 25
Front Shocks: PEP ZPS 8 click, anodized black big bottles- 2000 for all 3
Rear Shock: PEP ZPS 8 click ARC, anodized black bottle

Brake Lines: Racers Edge AZ, custom black dual feed fronts, single rear- Rear SOLD...Fronts- SOLD
Brake Line Clamps: LoneStar, 2 sets each side- SOLD
Rims F|R: Douglas Ultimate 4+1 fronts with MX Razr, PC Mirror Black- 350
Ultimate beadlock rears, PC Mirror Black, Wilder Red rings- 300

10 paddle Gliders- 200

Linkage: LoneStar DC-6- 200
Shifter/Brake Pedal: ESR billet-120
Caliper Plate: LoneStar billet-35


Plastic: OEM 05 Black- 150
Graphics|Seat Cover: LoneStar- 100 for seat and cover

Hood: Laker Custom Carbon look, scooped- SOLD
Gas Cap: Tusk Billet comes with tank- SOLD



Engine|Drive System:

Cylinder|Head: Racers Edge AZ National Motor
Bore & Stroke: Stock,Crank Works crank
Displacement: 500, DASA Billet 99mm cylinder, CP custom piston
Cam: Web
Carburetor: 43.5mm FCR
Air Filter|Box: DASA filter. Stock box
Pipe|Silencer: DASA
Clutch|Plates: OEM modified, Dark Synergy springs
Gearing F|R: 13, 14, 15 and 36-41
CDI|Killswitch: Pro Design
Cooling: Engine Ice
Other: This bike was built ground up and pieced together. Motor makes 64/40 on C12.

Motor and harness minus carb and pipe- 3,000

DASA pipe with shorty Black can- 300
Dyna Ign. Programmable- 200
Radiator- 50
Rear caliper- 50 with DFR block off
Front Master cylinder- 50 with billet cover
Rear master- 50
Subframe- 100 and is straight
Front calipers, rotors, spindles- 200

[mc_racer]

I may be interested in the plastics without seat, rear rotor, rear brake line, and axle depending on price.

[Zach648]

Id like to have the anti fade and the carrier on there. Let me know your price, PM me if you need to.

[Zach648]

is this morgan?

[R3Concepts]

Originally posted by Zach648
is this morgan?

Yes Sir it is.

[Zach648]

i cant believe your parting this bike out man, but if you wanna sell me the parts ill gladly pay!


On the suspension. If it for 1st gen 450r and if your lil bro dosnt want the arms, I may want them too.

[4bidden]

PM me a price on that frame Morgan!!!! I cracked my sub and main frame on Monday!

[R3Concepts]

PM sent.

[400exhotwire]

seat will work on an 07 wont it? if so, how much for it?

[R3Concepts]

I dont think the seats are the same.

[roundsy]

would also be interested in the DC-4 arms/tie rods/spindles/hubs/brakelines...if your brother chooses not to take it (basically the front end minus shocks...lol)

pm me a price when you know....thanks

[400exrider707]

Interested in seat cover, rear shock, and axle, all depending on price, and if your brother doesn't want it, and would you part the motor, or sell the motor whole? If so I'm interested in some parts, mainly cases.

[R3Concepts]

Motor needs to go all together.

Thanks for the interest. Hopefully we can get moving on this stuff pretty soon.

[mc_racer]

Originally posted by mc_racer
I may be interested in the plastics without seat, rear rotor, rear brake line, and axle depending on price.
Do you have an idea on a price for these parts?

[R3Concepts]

Originally posted by mc_racer
Do you have an idea on a price for these parts?

My brother would be getting the rotor, axle, and brake line...

The plastic, Id like to get 150 plus shipping. Not sure what the going rate on them is these days?

[hondarider101]

what would you want for the bumper? thanks jw

[g9901920]

ill take the bars.........PM me so i can send payment

[Zach648]

what do you want for the anti fade and the carrier?

[R3Concepts]

Prices posted, still waiting to hear from my brother.

PRICES DO NOT INCLUDE SHIPPING. IF YOU USE PP, PLEASE ADD THE 3%.

[mc_racer]

I'll take the rotors and rear brake line if your brother decides he doesn't want them.

[R3Concepts]

Brother cant swing it..


Everything is for sale. Lets do it.

[87-250R-racer]

still have the bumper and hood? PM me a price for both thanks.

[mc_racer]

Originally posted by mc_racer
I'll take the rotors and rear brake line if your brother decides he doesn't want them.
What's the total price shipped to 66061? Do you take paypal?

[400exrapes]

do you have the quadtech hood that was on during the qotm picture?

[blue450r]

What is he rear shock set up for? Oh yeah how much for it?

[R3Concepts]

Originally posted by blue450r
What is he rear shock set up for? Oh yeah how much for it?

Id like to keep the shocks together if possible, and they are all set up for 190lb A Rider.

[R3Concepts]

Originally posted by 400exrapes
do you have the quadtech hood that was on during the qotm picture?

No sorry its gone.

[R3Concepts]

Originally posted by mc_racer
What's the total price shipped to 66061? Do you take paypal?

PM me with everything that you need.

[Zach648]

Will you pm me your mailing addy, Ill send a money order for the anti fade.

[mc_racer]

Originally posted by R3Concepts
PM me with everything that you need.
pm sent

[R3Concepts]

Bump

[mc_racer]

Replied here because your PM box is full.

From the way I read the ad, I thought it was $40 for all three galfer rotors. Oh well. I'll pass on the fronts, but I'll take the rear galfer rotor and the rear brake line. $75 shipped right? How soon would you be able to ship them once payment is sent?

I'll let my buddy know the price on the plastics and can get back to you tomorrow on those.

[R3Concepts]

Originally posted by mc_racer
Replied here because your PM box is full.

From the way I read the ad, I thought it was $40 for all three galfer rotors. Oh well. I'll pass on the fronts, but I'll take the rear galfer rotor and the rear brake line. $75 shipped right? How soon would you be able to ship them once payment is sent?

I'll let my buddy know the price on the plastics and can get back to you tomorrow on those.

I can ship tomorrow. Sorry about that, if you look towards the bottom, I have the front rotors, spindles, and calipers for 200. Also the fronts are not wave rotors.

75 shipped is fine.

[mc_racer]

Not a problem, is the rear rotor like this?
http://www.wppracing.com/images/galfer%20rtr600.jpg

[R3Concepts]

Yes it is.

[mc_racer]

I'll take it, payment will be sent shortly.

[quadgod440ex]

How much for just the rear shock ? And any pics of the front so i can see the hood alittle better?

[R3Concepts]

Originally posted by quadgod440ex
How much for just the rear shock ? And any pics of the front so i can see the hood alittle better?

PM me a fair offer for the rear shock.

Whats an email address to send a pic of the hood?

[R3Concepts]

List updated. Quite a few things going fast.

[One_Bad_400]

Interested in the entire suspension set-up minus the swinger, so arms, tie-rods, front and rear shocks, and linkage. what weight are the shocks set up for? what length are the front shocks?

[R3Concepts]

Originally posted by One_Bad_400
Interested in the entire suspension set-up minus the swinger, so arms, tie-rods, front and rear shocks, and linkage. what weight are the shocks set up for? what length are the front shocks?

180-190 A Rider. They are 20" center to center for DC4s.

[400exrapes]

how much for the rear black plastic with all mounts and screws shipped to 10567?

[R3Concepts]

I think the plastic is all sold pending payment.

[400exrapes]

alright let me know if know if not, what about the mounting brackets do you have those?

[R3Concepts]

Originally posted by 400exrapes
alright let me know if know if not, what about the mounting brackets do you have those?

Yes I do, they would be extra, and I will not seperate the fronts from the rears.

[400exrapes]

well okay then

[R3Concepts]

Have pics of all the parts, post an email address ifs you want to see pics.

[mc_racer]

Did you find the tracking number for the rear rotor and brake line?

[R3Concepts]

Originally posted by mc_racer
Did you find the tracking number for the rear rotor and brake line?

Everything that has been sold has been shipped. All parts were shipped USPS Priority Mail, and the reciept shows a refrence number, is that the same??

Everyone should have there parts by now..They told me 3-4 days on everything in the lower 48.

[mc_racer]

That should be a confirmation number. It will tell us when it was delivered.


ETA--received 4/28 shipped on 4/24, parts look good, thanks

[450R#72]

very interested in the dasa pipe. Is it still up for sale? if so id like to purchase. Thanks

[R3Concepts]

Originally posted by 450R#72
very interested in the dasa pipe. Is it still up for sale? if so id like to purchase. Thanks

Yes it is. Its a shorty.

[450R#72]

do you know the decibal rating and how much hp it adds in place of the stock exhaust? thanks

[R3Concepts]

The shorty is louder then the Classic. It would make a few more on a stock bike, and become more and more of a factor when you start doing motor work. Its got one little spot thats been fixed, and the back of the can has been lightened. Id be willing to deal if you want to PM me.

[450R#72]

your pm inbox is full

i need a pipe that is 100 db or under because the sound limit is enforced at the mx tracks around me. And the regular dasa pipes give the 450r the most hp over any other quad. So idk if the shorty is about the same as the regular pipe.

[R3Concepts]

Cleaned out, not sure if its under 100db??

[awb03]

Do you still have the seat for sale and by any chance do you have the graphics that match it? Thanks

[R3Concepts]

Originally posted by awb03
Do you still have the seat for sale and by any chance do you have the graphics that match it? Thanks

Still have the seat, but the graphics came off right after I put them on. LSR told me they had a bad batch.

[awb03]

that sucks i really like thos graphics. My quad looks just like yours and i never even saw yours till now. even my back rims look identical haha

[R3Concepts]

Originally posted by awb03
that sucks i really like thos graphics. My quad looks just like yours and i never even saw yours till now. even my back rims look identical haha

Good deal.

[awb03]

does the seat have anything wrong with it?

[R3Concepts]

Originally posted by awb03
does the seat have anything wrong with it?

Nope, its in great shape.

[awb03]

Do you still have all the plastic and is it in good shape?

[R3Concepts]

Originally posted by awb03
Do you still have all the plastic and is it in good shape?

Yes and its in great shape. Like I said this bike was ridden 3 times at the dunes.

[400exrapes]

Originally posted by R3Concepts
Yes and its in great shape. Like I said this bike was ridden 3 times at the dunes.

I wanted to buy the rear fenders a while ago and I thought you said they were gone? if not I want those rears and mounting hardware!

[R3Concepts]

Originally posted by 400exrapes
I wanted to buy the rear fenders a while ago and I thought you said they were gone? if not I want those rears and mounting hardware!

I was waiting on a payment but it never arrived so they are for sale. I told you a while back that I would not seperate the fronts from the rears. Also, Ive already sold the lower fender brackets.

[awb03]

I wll take the plastic! how much to ship to 16509 and what kinda payment do you take? I called LSR yeaterday and they said they dont just sell the graphics. The kit has to come with a seat cover so i will have to skip on the seat

[R3Concepts]

Originally posted by awb03
I wll take the plastic! how much to ship to 16509 and what kinda payment do you take? I called LSR yeaterday and they said they dont just sell the graphics. The kit has to come with a seat cover so i will have to skip on the seat

Most plastic is 40-50 to ship. PM me all your info. PP is fine.

[400exrapes]

alright thanks anyways

[awb03]

PM you all i need is your pp and the total

[awb03]

payment send

[400exrapes]

I tried to send you a PM but your box is full, Can you PM me when you get the message of reply to the topic? Thanks.

[R3Concepts]

Originally posted by 400exrapes
I tried to send you a PM but your box is full, Can you PM me when you get the message of reply to the topic? Thanks.

Send away.

[400exrapes]

are the prices you posted all including shipping? if so will you do 100 shipped on front and rear plastic? PM me please!

[awb03]

Your inbox is full

[Zach648]

Do you happen to have a lower price on the a-arms?

[BlackTrx440ex]

ill take the axle pm me once you clean out your box

[Cool Guy07400EX]

Very very intrested in the dasa do you still have it and if so could you do 200?

[Chino886]

Originally posted by Cool Guy07400EX
Very very intrested in the dasa do you still have it and if so could you do 200?

Sorry, it's spoken for!