bdgt250x
04-02-2008, 04:19 PM
Hey i just tore my whole engine down, transmission and everything, and now am begining to bolt it back together. Ive put the cases back together following the manual step by step, put the clutch, flywheel and all that stuff back on and went to run it through the gears just to make sure everything was in order, using the kickstarter to turn it over.
Heres the problem, it seems like its stuck in the top 3 gears (3, 4, & 5) and it will not downshift any further. Also, i cannot find neutral, so im pretty sure im not in the lower gears. I know i assmebled the transmissing correctly and i alligned the shift forks and made sure they were in the correct groves in the shifter drum. Now Im stuck and am about to actually take it somewhere, which i kinda dont want to do. So if any one has any solutions or suggestions, id really appreciate it.
Thanks!
Heres the problem, it seems like its stuck in the top 3 gears (3, 4, & 5) and it will not downshift any further. Also, i cannot find neutral, so im pretty sure im not in the lower gears. I know i assmebled the transmissing correctly and i alligned the shift forks and made sure they were in the correct groves in the shifter drum. Now Im stuck and am about to actually take it somewhere, which i kinda dont want to do. So if any one has any solutions or suggestions, id really appreciate it.
Thanks!