D Bergstrom
03-31-2008, 09:49 PM
I have the following 250R parts for sale. All are off a 1986. Can e-mail pics.
IMS 4.0 gallon tank, black, in great condition. Includes cap, but no mounts, petcock, etc. SOLD!!!!!
Eyeball engineering swingarm. Few chips in powder coat, other then that in good shape. It has 87 skid plate mounts on it. Includes pivot bearings, sleeves, seals, etc. $250 shipped.
Set of Maier black front and rear fenders. Just normal scuffing, no cracks. Fronts have a 1 1/2" by 2 1/2" hole cut in each side at the front where my light mount went through. Looking to get $50 for the front, $50 for the rear, you pay for shipping.
Aluminum belly skid. I think it is a DG, but do not remember. Just minor scrapes. SOLD!!!!!
I also have a bunch of stock parts. I really have no idea how much to ask for them, I just want them gone. make me a reasonable offer and they are yours.
Stock tank, red, includes cap but no mounts, petcock, etc. SOLD!!!
Front hubs, no bearings or spacers.
Rear hubs SOLD!!!
Set of cases, polished, with bearings and seals. Chain side was repaired by previous owner. (threw a chain) Clutch side has a transmission bearing that does not fit in real tight. You still have to tap it in, but it is not a real snug fit. I ran it like this for two years with out a problem. SOLD!!!
Stator side cover, polished. SOLD!!!
Clutch side cover, polished. Check bolt was stripped and larger bolt JB welded in place by previous owner.
Polishing on the cases/covers probably needs a little touch up. I am just to lazy to do it.
If I find anything else I will add it to the list. I will accept paypal only. Any questions, let me know.
Doug
IMS 4.0 gallon tank, black, in great condition. Includes cap, but no mounts, petcock, etc. SOLD!!!!!
Eyeball engineering swingarm. Few chips in powder coat, other then that in good shape. It has 87 skid plate mounts on it. Includes pivot bearings, sleeves, seals, etc. $250 shipped.
Set of Maier black front and rear fenders. Just normal scuffing, no cracks. Fronts have a 1 1/2" by 2 1/2" hole cut in each side at the front where my light mount went through. Looking to get $50 for the front, $50 for the rear, you pay for shipping.
Aluminum belly skid. I think it is a DG, but do not remember. Just minor scrapes. SOLD!!!!!
I also have a bunch of stock parts. I really have no idea how much to ask for them, I just want them gone. make me a reasonable offer and they are yours.
Stock tank, red, includes cap but no mounts, petcock, etc. SOLD!!!
Front hubs, no bearings or spacers.
Rear hubs SOLD!!!
Set of cases, polished, with bearings and seals. Chain side was repaired by previous owner. (threw a chain) Clutch side has a transmission bearing that does not fit in real tight. You still have to tap it in, but it is not a real snug fit. I ran it like this for two years with out a problem. SOLD!!!
Stator side cover, polished. SOLD!!!
Clutch side cover, polished. Check bolt was stripped and larger bolt JB welded in place by previous owner.
Polishing on the cases/covers probably needs a little touch up. I am just to lazy to do it.
If I find anything else I will add it to the list. I will accept paypal only. Any questions, let me know.
Doug