I need help with jettings!!!

[arTuReX]

Ok i change the airfilter for a K&N i put a outerwearz skin to the filter and i removed the lid and put an outerwearz skin lid, and i just got a Yoshimura TRC Slip On, so i need jettings! and i have no idea what to try first or where to start with, i'm only gonna ride in Northern California(hollister,carnagie), Maybe pismo beach i'm not going anywere else, a little help please?????

[BlaineKaiser450]

im not an expert with slip on jetting, but i think you should try a 165 MJ and the A/F screw 2 - 2 1/2 turns out

One bigger on the pilot jet I can't remember what stock size is. Move the clip on the needle down one slot raising it up a little. 180-185 main jet.

[arTuReX]

ok i'm getting an idea, is this something i can do myself???

[d3ktrix]

Originally posted by BlaineKaiser450
im not an expert with slip on jetting, but i think you should try a 165 MJ and the A/F screw 2 - 2 1/2 turns out

He has an 04 not an 06+



Originally posted by TRX450R_Racer
One bigger on the pilot jet I can't remember what stock size is. Move the clip on the needle down one slot raising it up a little. 180-185 main jet.

Stock pilot in an 04 is a 48, so he's looking for a 50.

[arTuReX]

Ok now im confused!

[d3ktrix]

Originally posted by arTuReX
Ok now im confused!

Do like TRX450R_Racer said.
185MJ, 50 pilot, adjust A/F screw accordingly.
And 1 clip down on the needle if needed.

[arTuReX]

Thanks everyone

[arTuReX]

I changed to 185/50 thank to you guys, so far so good!

[d3ktrix]

Glad to help