PDA

View Full Version : Watercooled plastic propeller fix?


Logan #34's Dad
03-27-2008, 10:25 AM
OKAY all you cnc guys, who's going to be the first to make a propeller out of something besides the cheap plastic? I just opened mine up (just to paint the outer part different from the cover) and found my propeller in pieces. I don't have any idea how long it has been like this either. SCARY! I knew there was a reason not to go to Pell City.
BACKWOODSBOYZ
03-27-2008, 02:43 PM
Yes there is a need for a better design for all WC mini's
Has been a issue for us as well :(
woodsracer22
03-27-2008, 03:26 PM
THEY ARE COMING.
Logan #34's Dad
03-27-2008, 03:38 PM
Hey Woody, Got any kind of time line? This is not a good thing because you never know when there is a problem until it may be too late. I've got a rebuild kit on the way but I'd rather not ever have to worry about it.
Thanks
BACKWOODSBOYZ
03-27-2008, 03:43 PM
Also who might be making them,so we all can race to the
phone to get or order in......
Ryki3r
03-27-2008, 03:46 PM
http://www.sip-scootershop.com/pages/index.php?PORTAL=Froogle&COUNTRY=US&ID=17998&PORTALID=192794&EXPLODIM=px&_requested_page=%2Fpages%2Fdetails.php
I cannot get the link to work right but type in water pump in the bottom left corner to see the different types of pumps.
Logan #34's Dad
03-27-2008, 03:50 PM
Here's a pic of it.
woodsracer22
03-27-2008, 04:54 PM
http://i26.tinypic.com/aktqop.jpg It will be 30 to 40 days. The new ones will have a CNC impeller.
XXX -rider
03-27-2008, 05:09 PM
Originally posted by woodsracer22
http://i26.tinypic.com/aktqop.jpg It will be 30 to 40 days. The new ones will have a CNC impeller.

will it work on all watercooled mini's ?
tireman43
03-27-2008, 05:15 PM
It will work on all minerelli/jog style minis.

Well Bill you must be making some progress since you talked to me about those last.:D

Kevin
woodsracer22
03-27-2008, 06:55 PM
Yes Kevin I can get the plastic one like the one in the pic now. But Iam wating for the CNC impeller ones. 40% more flow less overheating is good right.
Logan #34's Dad
03-27-2008, 07:48 PM
Again, Woodsracer22, What kind of time line are you looking at to get one of these in my hand. I am now scared - too much money in this motor to have a cheap plastic part fail.
tireman43
03-27-2008, 07:57 PM
Unfortunately he said 30-40 days. You will probably need to get the stock replacement in the meantime. These will be very nice when they come in though.

Kevin
tireman43
03-27-2008, 07:59 PM
Originally posted by woodsracer22
Yes Kevin I can get the plastic one like the one in the pic now. But Iam wating for the CNC impeller ones. 40% more flow less overheating is good right.

If you can remember let me know details on Saturday.

Kevin