Who's 350 Cyl?

[TrxR]

I am looking at putting a 350 or 350PV cyl on my woods\play riding R. I am a big guy and like the torque but don't want a 4 stroke. Who's cylinder should I go with ? What pipe and carb would you suggest?

Thanks

[1Sick250R]

I'd suggest an ESR 350 kit with their trx9 porting. A 38/39mm keihnin and a ESR trx6 pipe should work nice.:devil:

[CorvetteZ06]

try looking into a PC2000 340cc powervalve motor from Duncan, they use the rotax powervalve, its much better than esr's system. CT racing also makes a Nice 350cc powervalve top end. you cant go wrong with either a 38/39 mm kehin A/S. For exhaust, you should buy whatever company is doing your cylinder. Good luck man, :cool:

[JeremyKS]

I would look at one of CPs ind. new cylinders like the Puma

[TrxR]

Didnt the older ESR cyls use the rave valve? This is going to be a woods trail play big and I am a big guy. Do you think the 350 will be overkill? is the PV suggested? How is the reliability of the 350's ? Are stronger gears like the yukons suggested? who else makes better gears?

Anyone have a link to the CP cylinders?

Also anyone happen to know what pipe this is?

[havinnoj]

No idea about the rave valve or woods riding.

How much do you weigh?

Reliability is fine as long as built by a reputable builder. 350's don't leave as many overbores as a smaller cylinder.

Yukon gears are a quality product but you can also cryo treat your gears.

CP Industries (http://www.cpindinc.com/)

[TrxR]

Im about 6'3 and 280+