Parting Out 2 '87 250rs - Big List of Parts

[muff]

Sold.

[tys88r]

How much for Quadtech hood shipped? And condition?? Pics? Tylerpierce@wbcable.net

[mcarlson1]

Are you selling the pro pegs? If so how much? and how much for the walsh a arms?

[97WarriorRider]

do you have oversize bar clamps?

[Black_Label]

I will trade you a 94 Chevy Silverado for the whole quad

[AB250R]

WHAT SIZE IS THE CARB??? AND I NEED PRICE ON REAR WHEELS AND TIRES AND CARB MAKE IT RIGHT AND ILL TAKE THEM BOTH... THANKS

[desertracr15]

how much for the seat hardware including front seat catch and rear seat latch

[rustyATV]

How much for the radiator, and what condition is it in?

[atvnut07]

Do you have either one of these parts in good shape? If so, how much shipped? Thanks!

[muff]

Originally posted by tys88r
How much for Quadtech hood shipped? And condition?? Pics? Tylerpierce@wbcable.net

The hood is selling with the fenders.




Originally posted by mcarlson1
Are you selling the pro pegs? If so how much? and how much for the walsh a arms?

The pro pegs are for sale and would sell them for $700 with the walsh.




Originally posted by 97WarriorRider
do you have oversize bar clamps?

None here but I could get you a price on a new set if you were interested.



Originally posted by Black_Label
I will trade you a 94 Chevy Silverado for the whole quad

Sorry but if you sold the truck I would take around $3,000 for the quad.





Originally posted by AB250R
WHAT SIZE IS THE CARB??? AND I NEED PRICE ON REAR WHEELS AND TIRES AND CARB MAKE IT RIGHT AND ILL TAKE THEM BOTH... THANKS

The carb is a 38mm Air Stryker. I could do $360 shipped for both.




Originally posted by desertracr15
how much for the seat hardware including front seat catch and rear seat latch

The one bike that was compete had an aftermarket seat post.




Originally posted by rustyATV
How much for the radiator, and what condition is it in?

Radiator is in good shape, $85 shipped and its yours.





Originally posted by atvnut07
Do you have either one of these parts in good shape? If so, how much shipped? Thanks!


The swingarm is in good shape and I have a pivot bolt that could go with it. $70 shipped for both.

[norcalduner]

sent you a pm

[muff]

Originally posted by norcalduner
sent you a pm



You have to go to your sent message box and clean out all of those messages. I would take $25 shipped for the lever.

[norcalduner]

Originally posted by muff
You have to go to your sent message box and clean out all of those messages. I would take $25 shipped for the lever.

okay thanks ..... now try to pm me your address so i can send you a money order.

[SET THE STAGE]

i see you want 30 for your front wheels and tires.. well how much would you want for JUST the wheels shipped to 61611?

[muff]

Originally posted by SET THE STAGE
i see you want 30 for your front wheels and tires.. well how much would you want for JUST the wheels shipped to 61611?

Check your pm's.

[g9901920]

ill take the a arms.....PM sent

[86 Quad R]

-Stock airbox w/ K&N filter and Janseen snorkel block off plug. $30 Pic

do you have a lid for the box?

[TOOLMANGTO]

do you still have the red gas tank ?
If so how much shipped to 67501

thanks

[beak7707]

sent you a pm

[muff]

Originally posted by 86 Quad R
-Stock airbox w/ K&N filter and Janseen snorkel block off plug. $30 Pic

do you have a lid for the box?

I don't have any airbox lids here.




Originally posted by TOOLMANGTO
do you still have the red gas tank ?
If so how much shipped to 67501

thanks

Yup still have it, $30 shipped and its yours.

[CSR400EX]

how much shipped to 45042 for the rear wheels and turf tamers??

[muff]

Originally posted by CSR400EX
how much shipped to 45042 for the rear wheels and turf tamers??


$140 shipped and they're yours.

[Swiper77]

Will you make a deal for the lot of harware "motomounts and bolts,tie rods,and airbox shipped? What legnth are the galfer brake lines if they're +2 add them to the list please.

[muff]

Originally posted by Swiper77
Will you make a deal for the lot of harware "motomounts and bolts,tie rods,and airbox shipped? What legnth are the galfer brake lines if they're +2 add them to the list please.


$80 shipped for the hardware and tie rods. The airbox is pending a sale. I have a set of blue dual front brakelines here that will reach up to +3 a-arms. $40 for those.

[Flyin_250r]

Just wondering what width the Walsh arms are? Do they come with Tie Rods?

[muff]

Originally posted by Flyin_250r
Just wondering what width the Walsh arms are? Do they come with Tie Rods?


They're +2.5" and I don't have any tie rods for them.

[speedracer450r]

what condition are thgose front wheels in if they aren't sold?

[muff]

Originally posted by speedracer450r
what condition are thgose front wheels in if they aren't sold?


I still have all of the sets listed in the first post.

[ride red 14]

pm sent

[woodsracer144]

pm me if you have any shocks to go with the walsh front end...

[muff]

Originally posted by ride red 14
pm sent

Hmm didn't seem to get it.




Originally posted by woodsracer144
pm me if you have any shocks to go with the walsh front end...


Nope sorry.

[ride red 14]

o well i was asking if you still had the rear grab bar. also will it fit an 89 250r? if so i will take it

[muff]

Originally posted by ride red 14
o well i was asking if you still had the rear grab bar. also will it fit an 89 250r? if so i will take it


I've got an AC and a PRM here. AC is in OK shape the PRM is good.

http://img.photobucket.com/albums/v670/muff400/250rs/DSC05640.jpg

[250Renvy]

Do you still have everything that's listed on the first page?

The bolts in the hardware kit - for the a-arms are they flange bolts or Hex style stainless?
Can you throw in the Exhaust hangers if you have them? Need shock mount bolts.

Any holes or cracks in the airbox?

Do you have an aftermarket seat latch? or front seat mounts for 87?

Interested in :

-PRM grab bar, straight $20
-Hardware set, motor mount bolts. Everything to a complete 250r. $40 Pic
-Rear wheel hubs, painted black. $40 Pi
-Stock airbox w/ K&N filter and Janseen snorkel block off plug. $30 Pic
-Aftermarket clutch lever and cable $15 Pic
-Red gas tank with cap and petcock $20 Pic Pi

[muff]

Originally posted by 250Renvy
Do you still have everything that's listed on the first page?

The bolts in the hardware kit - for the a-arms are they flange bolts or Hex style stainless?
Can you throw in the Exhaust hangers if you have them? Need shock mount bolts.

Any holes or cracks in the airbox?

Do you have an aftermarket seat latch? or front seat mounts for 87?

Interested in :

-PRM grab bar, straight $20
-Hardware set, motor mount bolts. Everything to a complete 250r. $40 Pic
-Rear wheel hubs, painted black. $40 Pi
-Stock airbox w/ K&N filter and Janseen snorkel block off plug. $30 Pic
-Aftermarket clutch lever and cable $15 Pic
-Red gas tank with cap and petcock $20 Pic Pi



I still have almost everything listed in the first post. The bolts are the stock flange bolts, I don't have any extra hangers here. I have an aftermarket seat latch but would like to leave it with the seat that it's on.

The airbox has sold but have the rest of the parts here. I could do $140 shipped for the rest of the parts.

[250Renvy]

I'll take hardware and gas tank.

PM paypal.

[g9901920]

pm me lowest price fot the walsh arms

[muff]

You guys have PM's.

[muff]

bump

[250rbadboy]

did you sell hardwear

[LT250RMan]

PM SENT !

[yfzrider45]

Would that RAD bearing carrier fit a stock yfz swingarm, with a 250r +4 axle??? if so i'll take it!!!

[yfzrider45]

PM sent man, I want the RAD carrier for sure!!

[muff]

Originally posted by 250rbadboy
did you sell hardwear


Hardware has sold, guys check your pm's.

[smr2]

pm

[Master LTR450]

pm sent

[step869]

plastic and hood still for sale???????

how much shiped to ny 14513

i dont want or need the seat

and what kinda shpe are the plastics in???????

thanks,
john

[Honda5]

I'm looking for a carb the 38 you have might work for me but it's not a air striker so will you take less?

[muff]

Originally posted by step869
plastic and hood still for sale???????

how much shiped to ny 14513

i dont want or need the seat

and what kinda shpe are the plastics in???????

thanks,
john


I could do $240 shipped for the fenders. They're in good shape, there right fender has been cut out for a kick start to clear.

http://img.photobucket.com/albums/v670/muff400/250rs/P4086450.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086451.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086453.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086454.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086455.jpg




Originally posted by Honda5
I'm looking for a carb the 38 you have might work for me but it's not a air striker so will you take less?

You're right I double checked and its a PJ carb instead. I would take less, PM an offer if you're still interested.

[muff]

A few parts are now up on Ebay (http://stores.ebay.com/MuffsMotorsports_Honda-250r_W0QQcolZ4QQdirZ1QQfsubZ10278390QQftidZ2QQtZkm )

[muff]

eBay auctions are ending tonight, more to be listed soon!!

[muff]

Round 2 of auctions ending soon!! EBAY AUCTIONS (http://stores.ebay.com/MuffsMotorsports_Honda-250r_W0QQcolZ4QQdirZ1QQfsubZ10278390QQftidZ2QQtZkm )

[bridanmya]

still have frame? whats lowest ull take? thanks

[muff]

Originally posted by bridanmya
still have frame? whats lowest ull take? thanks


Yup still have it. $400 shipped and its yours, the frame is actually an '86.

[muff]

bump

[kiesta00]

How are the hub splines on the stock axle? Any wobble/shake when the hubs are placed on the axle? Is the axle straight?

I'm interested in the axle and the steering stem. How much for both shipped to 70570? You wouldn't have any engine cases for sale too?

Thanks.

[muff]

Originally posted by kiesta00
How are the hub splines on the stock axle? Any wobble/shake when the hubs are placed on the axle? Is the axle straight?

I'm interested in the axle and the steering stem. How much for both shipped to 70570? You wouldn't have any engine cases for sale too?

Thanks.


Sorry but the axle and stem have both sold. I don't have any cases here but I do have a complete motor here that I would sell cheap.

[kiesta00]

how cheap is "cheap". Is it a running motor? specs?

[BigBore24]

do you have a seat?

[muff]

Originally posted by kiesta00
how cheap is "cheap". Is it a running motor? specs?


I'd take $350 for it. It'll need to be gone through, everything is there and the previous owner said he just "rebuilt" it. It doesn't shift through the gears and the sprocket shaft doesn't spin. I want to take it apart but I haven't had time yet.

http://img.photobucket.com/albums/v670/muff400/250rs/P4226561.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4226562.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4226563.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4226564.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4226565.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4226566.jpg




Originally posted by BigBore24
do you have a seat?


Take your pick. $50 for either one.

http://img.photobucket.com/albums/v670/muff400/250rs/DSC05647.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/DSC05648.jpg

[BigBore24]

sweet how about a rear caliper

[muff]

Originally posted by BigBore24
sweet how about a rear caliper


I have 2 here, one is black and in good shape. The other has been powdercoated blue but the bleeder valve will need to get fixed on it.

[jread14]

[QUOTE]Originally posted by muff
[B]I could do $240 shipped for the fenders. They're in good shape, there right fender has been cut out for a kick start to clear.

http://img.photobucket.com/albums/v670/muff400/250rs/P4086450.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086451.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086453.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086454.jpg
http://img.photobucket.com/albums/v670/muff400/250rs/P4086455.jpg

Did he buy these!!!! How much shipped down south to 76234?

[muff]

Originally posted by jread14
Did he buy these!!!! How much shipped down south to 76234?


I still have them, $240 and they're yours.

[muff]

I have a few parts up on eBay!! (http://stores.ebay.com/MuffsMotorsports_Honda-250r_W0QQcolZ4QQdirZ1QQfsubZ10278390QQftidZ2QQtZkm )

[Pimped_wart_no2]

any chance you still have the fullbore plastics?