View Full Version : 01 raptor shock adjustment
BR16250
03-21-2008, 03:28 PM
does anyone know how to soften up the raptor shock? is it through the rezzie or the threads on the top of the shock
both, back off those preload rings a lot and set the compression really low.
BR16250
03-21-2008, 04:59 PM
i dont really feel like taking the rear shock off because its a pain in the *** but do u know how to adjust the rezzie?
BR16250
03-21-2008, 06:21 PM
where? there is nowhere for a screwdriver to be used on the rezzie. and which way should i turn to make it softer
on the shock there should be 2 screw. 1 near or on the rezzie which is compression and 1 on the shock which is rebound.
BR16250
03-21-2008, 07:36 PM
do i turn the screw left or right? to make it softer
Honda10
03-22-2008, 10:18 AM
try both and then jump on it, that is what I did. but the adjusting the preload would probably do the most.
scrappy3
03-23-2008, 06:24 PM
The compression screw is on the front of the rezzie were the hose goes in and the rebound is on the bottom of the shock. Turn them clockwise for more and counter for less.
BR16250
03-23-2008, 07:11 PM
i think that u had it all the way counterclockwise so i think it'll be fine
scrappy3
03-24-2008, 08:19 PM
Yes I think you are correct. I adjusted the compression all the way for Austin because he is only 85lbs. Work with the rebound screw it should help you dial it in for your ridding style.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.