400ex AC, lsr, laegar, rpm, etc lots of stock parts also

[f4istunna]

Updated list on last page Tons of parts added aftermarket and OEM

[f4istunna]

...

[f4istunna]

little dirty in the pics, just got done riding. All the parts will be cleaned up and i'll ship by next business day after paid.

[my88r]

when you get a complete price list i will be intersted in some stuff.

BTW those a-arms worked great in Florida. :)

[f4istunna]

;) you ran the gncc in FL? How'd you do?

Im going to get it torn rest of way down tonight or tomorrow and ill get pics and complete list

[my88r]

Originally posted by f4istunna
;) you ran the gncc in FL? How'd you do?

Im going to get it torn rest of way down tonight or tomorrow and ill get pics and complete list

i didn't race. we rode at crooms riding area. my uncle raced the bike on Tuesday. was a pretty nice place though.

[g9901920]

ill take those plastics for sure if you will sell them,
need them bad.
thanks a lot

[f4istunna]

im probably hanging onto the plastics for my next rebuild ( i like changin colors up every year or so)

Ill let you know if i change my mind for sure though.


All parts will be shipped by next business day at latest once paid. Accept paypal and Mo's. If you dont like the price talk to me. The more you buy the better the deal


-- Frame PC silvervein nice $300
-- subframe PC silvervein $60
-- Air shrouds custom made $30
-- AC mudscreen bumper $30
-- Full white bros exhaust $190 nice shape
--Protaper 1 1/8 rm windham med. bend bars $30
--Ac propegs w/ all hardware $95
-- Baldwin gripper seat (black) few very small nicks in cover, soft foam $35 w/ pan and latch
--Works rear shock $135
--Rpm dominator Axle $150
--Belly skid W/ all but middle 2 clamps $30
-- Custom aluminum airbox w/ K&n filter $55
--Lsr Twin row carrier $70
--Lonestar + 1 1/4 Swingarm PC silvervein $225
--Nacs case saver $15
--Braided front lines $25
-- custom made aluminum open airbox $35
--Aluminum airbox room for battery $50
--Wave rear brake rotor $25


not sure if selling the engine or keeping for spare yet.

(may have more aftermarket parts to add in near future, depends what i use.)

might be selling a set of burgard +2 ST w/ pep shocks the arms have the bigger lower balljoints.



Oem

Front wheels $55 pair SOLD
Front wheels $55 pair
Front master cylinder w/ lever $20
Spindles $35 pair
Front hubs w/ rotors $40 pair
Complete wire harness w/ all components (cdi, coil, recitifier etc) $40
Oem gas tank w/ cap and petcock $10
Oil tank (black) w/ cooler and lines $30
Rear caliper $35
Rear master cyl, resi and lever $25
Gas tank heat sheild $5
Rear wheel hubs $30
tailight no cracks w/ wires and bumb $10
stock airbox w/ lid $20
Axle w/ sprocket hub and locknut $40
header w/ sheild $10
header w/ sheild $10
stock muffler no baffle $10
rear oem metal skid $10
steering stem $25
brake stay $5
chain and sprockets $20 fairly new
headlight switch/kill $20
Ignition switch w/ key $15
ignition switch w/ key $15
Complete wire harness w/ all but coil $30
gas tank w/ cap and petcock $10
Thumb throttle w/ cable SOLD
Carb $40

[f4istunna]

Added a few parts to the list

Heres one of the airboxes I had the rear weld repaired last week professionally. Its ready to go, enough room for battery in box.

[AtvMxRider]

$25 shipped for the pro tapers????

[f4istunna]

ill do $35 shipped on them. They are straight cr mid bend they have a name on them (bend) i think reed but ill have to dbl check

[REDRIDDER]

can i see a pic of the rear sub frame?thanks.

[AtvMxRider]

pm'd you about bars

[f4istunna]

Pics of everything coming shortly

[IMSROLL450R]

Whats the condition on the PEPs you mentioned? Im looking for some aftermarket ST shocks. Thanks.

[f4istunna]

they are in pretty good shape. they are covered now. I bought them used off here last year and probably put 7 or 8 rides on them. they work good, few chips in the springs remote resi.

I might keep that setup for my R not sure yet...

[f4istunna]

silvervein subframe

[f4istunna]

carb

[f4istunna]

protaper

windham rm mid bend

[f4istunna]

works rear shock works good, good charge i checked the pressure at valve

[f4istunna]

spindles

[f4istunna]

shrouds

[f4istunna]

lsr stem ??probably not for sale but just in case i wanted a pic lol

[f4istunna]

AC propegs w/ all mounting hardware

[f4istunna]

custom made open airbox. Will fit battery inside

[f4istunna]

Lsr swingarm + 1 1/4 nice silvervein PC

[f4istunna]

carrier

[f4istunna]

stock stem

[f4istunna]

full white bros Clean no rust, small dent in rear cant be seen when mounted

[f4istunna]

dent in can

[f4istunna]

rpm dominator axle

[f4istunna]

axle

[f4istunna]

ac mudscreen

[f4istunna]

belly skid

[f4istunna]

frame PC silver vein very good shape only wear is on very bottom of lower rails

[REDRIDDER]

Originally posted by f4istunna
full white bros Clean no rust, small dent in rear cant be seen when mounted that dent is supposed to be their.mine has the same indent lol...how much you looking to get for the pipe?

[f4istunna]

i thought it looked like a pretty clean dent lol, come to think of it my other white bros had one in the same spot :D


Not really sure what the white bros is worth $200 ballpark?

[REDRIDDER]

f4istunna
i sent you a pm please check it...see what you can do for me lol...

[REDRIDDER]

f4istunna
your box is full.

[f4istunna]

Cleared them sorry about that got alot of msg's yesteday when i posted these parts

[dondiesel444]

pm sent

[f4istunna]

replied

[f4istunna]

one set of front wheels sold. Still have a set available

[f4istunna]

Other set of front wheels, carrier, chain and sprocket and tires SOLD

[f4istunna]

All parts will be shipped by next business day at latest once paid. Accept paypal and Mo's. If you dont like the price talk to me. The more you buy the better the deal


-- Frame PC silvervein nice $300
-- subframe PC silvervein $60
-- Air shrouds custom made $30
-- AC mudscreen bumper $30
-- Full white bros exhaust $190 nice shape
--Protaper 1 1/8 rm windham med. bend bars $30
--Ac propegs w/ all hardware $95
-- Baldwin gripper seat (black) few very small nicks in cover, soft foam $35 w/ pan and latch
--Works rear shock $135
--Rpm dominator Axle $150
--Belly skid W/ all but middle 2 clamps $30
-- Custom aluminum airbox w/ K&n filter $55
--Lsr Twin row carrier $70 SOLD
--Lonestar + 1 1/4 Swingarm PC silvervein $225
--Nacs case saver $15
--Braided front lines $25
-- custom made aluminum open airbox $35
--Aluminum airbox room for battery $50
--Wave rear brake rotor $25


not sure if selling the engine or keeping for spare yet.

(may have more aftermarket parts to add in near future, depends what i use.)

might be selling a set of burgard +2 ST w/ pep shocks the arms have the bigger lower balljoints.



Oem

Front wheels $55 pair SOLD
Front wheels $55 pair SOLD
Front wheels $55 pair
Front master cylinder w/ lever $20
Spindles $35 pair
Front hubs w/ rotors $40 pair
Complete wire harness w/ all components (cdi, coil, recitifier etc) $40
Oem gas tank w/ cap and petcock $10
Oil tank (black) w/ cooler and lines $30
Rear caliper $35
Rear master cyl, resi and lever $25
Gas tank heat sheild $5
Rear wheel hubs $30
tailight no cracks w/ wires $10
stock airbox w/ lid $20
Axle w/ sprocket hub and locknut $40
header w/ sheild $10
header w/ sheild $10
stock muffler no baffle $10
rear oem metal skid $10
steering stem $25
brake stay $5
chain and sprockets $20 fairly new SOLD
headlight switch/kill $20
Ignition switch w/ key $15
ignition switch w/ key $15
Complete wire harness w/ all but coil $30
gas tank w/ cap and petcock $10
Thumb throttle w/ cable SOLD
Carb $40

_________

[NeedsaYfz]

Baldwin seat and stock stem for $60 shipped to 01093? Let me know.

[f4istunna]

i need the seat for about a week. Im dropping it off w/ cosmic quads to get recovered for my wifes bike.

Ill do the stock stem for $30 shipped if you want it

[Exrider434]

Do you have any stock a-arms?

[f4istunna]

sure dont sorry man

[Honda5]

is the dominator a +1+4?
give me your shipped price on;axle carb and stem shipped to 21668.

[f4istunna]

Axle is on ebay stock stem and quite a few other parts are pending for pickup saturday.

the carb is still available probably around $40-$45 shipped tops

[400exMO]

35$ shipped for the bumper. pm me let me know

[f4istunna]

bumper sold today sorry

Ill make a new list tomorrow when i get a chance w/ what all is still available

[f4istunna]

Ok heres an updated list of my 400ex parts.

Let me know if you guys want anything. Whatever is left at the end of the week im going to throw on ebay.

Engine:

-Complete cylinder head w/ valves $165
-Rocker box complete $30
-426 (88mm) cylinder w/ wiseco piston Good shape(still crosshatch) $165 comes w/ brand new rings
-Complete bottom end runs and shifts good, good cases, sidecovers, tranny etc, everything minus clutch (kept for spare) $475
-Starter $25
-Stock cam w/ gear $20
- good cam chain tensioner $10
- Carb $40
-Rocker box (needs one of the caps you remove to adjust valves) $20
-Stock bore cylinder w/ stock piston - Cylinder in nice shape fresh hone (i'd rering piston before use) $135
-Cylinder w/ new in box namura piston (406) cylinder needs bored to match piston $90


-- 03 Frame PC silvervein nice shape $225
--subframe PC silvervein (small rub on end from standing on grab bar) $55
--Stock axle w/ sprocket and hub $30
-- Rear wave rotor looks to be good shape $25
--Motor mounts (complete set) $10
--One front wheel hub $15
--aftermarket clutch perch and lever $5
-- Battery box w/ hold down $5
--yellow tank cover $5
--footpegs $5
-- 38T rear sprocket $5
Oem clutch lever and perch $5
--black tank side plastics $10
--Gas tank w/ petcock and cap $10
Gas tank w/ petcock and cap $10
--Open aluminum airbox (big enough for battery relocate) $40
-- oem front shocks $20
--Rear wheel hubs red $30
--Works Rear shock good charge $75
--Durablue adjustable lowering link $30
--stock linkages $10
--stock linkages $10
--Complete hardware kit (nuts, bolts, engine mounts, snap rings etc) $30
-- Homemade aluminum airbox open w/ velcro for prefilter $20
--Oil tank w/ cooler and lines black $30
--Stock metal swinger skid $5
--rear caliper stay $5
--rear caliper stay $5
--Front spindles (pair) $35
--Rear brake master w/ resi and lever $25
--Oem muffler (no baffle) $5
--gas tank heat sheild $5
--gas tank heat sheild $5
--gas tank heat sheild $5
--Oem bumper $5
--white airbox snorkel tube $5
--black plastic tank side panels $10
--stock header w/ heatsheild $5
--Swing arm chain slider (pivot) $5
-- stock axle locknut $3
--Footpegs $5
--Rear caliper unsure condition (never used) $10
--oil cooler (few fins pushed around $5)


**ADDED**
Red Oem plastic very good shape no cracks normal scuffs one industries graphics Full fender $100 F, R, and sides
-Seat pan w/ latch, foam and one industries gripper cover red/black $45
-Rear hubs $30
-Front hubs w/ rotors good bearings $35
-Oem carb $40
-thumb throttle w/ cable $25
-set of oem a arms in great shape few nicks nice bottoms not wore out, good boots and bushings $95
-subframe straight $45
-oem carrier good bearings $35
-oem swingarm w/ good bearings and chain slider $95
-Front wheel spacers $30 pair
-Rear wheel spacers $30 pair
Aluminum frame guards $30 pair
-Rear rotor w/ hub $25
-AC nerf bars black nets $60
-Oem footpegs $5
-FMF Powercore IV w/ clamps and spacer $90
-Oem axle w/ sprocket hub and castle nuts $40
-Spindles w/ castle nuts $35
-gastank, cap and petcock $10
-Complete Hardware kit -- motor mounts, fender brackets, most nuts and bolts etc $25
-airbox w/ vented lid and intake tube/snorkel w/ uni filter $25
-oem toolbox w/ tool kit $15
-Ac mudscreen Bumper black $25
-Gas tank heat sheild $5
-Stock header w/ sheild $10
-battery box and strap $5
-Oem rear shock $25
oem front shocks $25
-chain and sprockets good shape $20
-Complete wire harness, aftermarket cdi coil, rectifer, etc$40
-Front calipers w/ good pads and lines $35
-Front master cylinder and lever $25
-Rear caliper lsr blockoff $35
-Rear master, resi and lines $25
-Protaper fatbars Gold lowbend $25
-Fat bar adapters for stock style stem $15
-Oem muffler w/ baffle $20
-tailight w/ bulb $10
-stock linkages rear shock $10
-99 Frame w/ title good shape $250
-headlight $30
-ignition w/ key $10
-Oversize oil tank w/ cooler and lines $60
-B&M aluminum shrouds $25
-Belly skid w/ hardware $30
Swingarm skid $25


All prices are plus shipping. Will ship by next business day after payment is made. Paypal or Money orders

thanks

[f4istunna]

stock stem

stock bore cylinder w/ new piston kit

SOLD!!

[f4istunna]

416 cylinder and piston
open alum box battery relocate
works rear shock
rear master and lever
rear caliper

SOLD

[f4istunna]

updated list a few posts above... Starting to list most of it on ebay when i get time this week/weekend let me know if you guys are interested in anything beforehand.

[f4istunna]

frame guards

[f4istunna]

nerfs

[f4istunna]

front plastic

[f4istunna]

rear and seat

[f4istunna]

fmf powercore IV

[f4istunna]

spacers

[f4istunna]

rear

[f4istunna]

front

[f4istunna]

some of the pics i have are too big to post.

If you want to see pics just post or pm me your email and ill send them

thanks