Tire Pressure???

[Bigdaddy52302]

I just got my new rims and tires, they are 20x11x10 maxxis razr in the rear and 21x7x10 maxxis razr in the front, my question is what psi should I be running. The tires don't say, it only says not to inflate beyond 36 psi when setting the bead. Well the bead was set from rockymountin atv before they were shipped. So I inflated them to 36 psi then down to 30 psi and now down to 25 psi but that still feels like to much? What should I run, I like to jump and trail ride?

Also anyone have a link to the forum that tellls you step by step how to post pics in the forum with a snapfish account?

[Jnblaster05]

i run about 5 lbs in my holeshot hds

[drew416ex]

I run mx so mine are anywher between 5-10 psi

[2muchquad]

I usually run about 5 for max traction with my 20in holeshots

[hornetgod13]

4 to 6 psi is where you need to be.

[Bigdaddy52302]

Ok so now I know I am way over inflated, glad I havent went riding yet. Probably would have came down from a jump and blew all the tires out:eek2: So I will find what feels good between 5 and 10 psi, but is that on the fronts too?:confused:

[hornetgod13]

I run the fronts a PSI or two higher than the rears.

[Honda#4]

I run 3psi in the fronts and 2 in the rear on my HD's.

[Bigdaddy52302]

Now I have to go buy a low pressure tire gauge, I dont know how I have been riding for so long and just now ran into this situation???? Live and Learn.:rolleyes: