06 ltr problems

[250excrf250r]

i am looking at a 06 ltr w/ cherry bomb,pro taper bars, and rear razrs. they claim 20hrs.and have title for 4250. but were ther problems with the 06's. and wat would have to be done to get fixed.

[Bkillerp]

There was a frame recall, but it was for the earlier '06 frames. I suggest getting the S/N number from the seller and looking it up. Also they have the 'shift pin problem' that all the LTR's seem to have, but it's an easy and cheap fix with the relocate bracket. Here is the recall info. I know, it's a lot to read, but it's good info if your frame falls into the recall category.
---------------------------------------------------------------------------------

June 2, 2006

AMERICAN SUZUKI MOTOR CORPORATION

SAFETY RECALL CAMPAIGN
LT-R450K6 QUADRACER ATVs
FRAME WELDING/REPLACEMENT

Dear Suzuki Owner,

This notice is sent to you in accordance with the requirements of the Consumer Product
Safety Act.

What is the reason for this notice?

Suzuki Motor Corporation has decided that a defect which relates to product safety exists in certain 2006 model year LT-R450K6 QuadRacer ATVs. In cooperation with the U.S. Consumer Product Safety Commission, Suzuki Motor Corporation is conducting a
voluntary Safety Recall Campaign for these ATVs.

What is the problem?

Suzuki Motor Corporation has determined that certain 2006 model year QuadRacer ATVs have a rear suspension cushion lever mounting bracket on the ATV frame that can break under certain high-stress conditions. The rear suspension cushion lever, which connects the rear shock absorber and the ATV swing arm, is bolted to this mounting bracket. It is possible that very high stress from making jumps and landing with the rear brake applied can impart forces to the suspension lever mounting bracket, in the area around the bracket mounting hole, which can cause the mounting bracket to break apart. If the mounting bracket breaks apart, the rider could lose control of the ATV, possibly resulting in injury or death.

DO NOT OPERATE YOUR AFFECTED
2006 model year LT-R450K6 QuadRacer ATV

To minimize the risk of injury or death, do not ride, or allow anyone else to ride, your ATV until your ATV has been repaired by your Suzuki dealer.

What is Suzuki doing to solve the problem?

Your dealer will inspect the frame to determine if it needs to be welded or replaced. If necessary, the dealer will replace the frame assembly. There will be no charge to you for any recall service related parts or labor.

What should you do?

Bring your ATV to your dealer for the repair. To aid your dealer and Suzuki, make sure you are prepared for the recall service by taking the following steps:

Contact your Suzuki dealer as soon as possible to set an appointment for the recall service

Plan your personal schedule so you will not miss your recall service appointment

When you transport your ATV to the dealership, take care to protect it from damage and load it per the recommendations in the ATV's Owner's Manual

Clean your ATV thoroughly, so your dealer can perform the recall service quickly

What to do if you receive this letter in error?

This notice was mailed to you according to the most current information we have available. If you no longer own a 2006 model year LT-R450K6 QuadRacer ATV or never owned one,
please fill out and return the post card included with this letter. If you sold your ATV, please forward this information to the person to whom you sold your ATV.

Who to contact if you experience problems?

Your Suzuki dealer can provide you the fastest response to your questions or concerns about the frame program. If you have any difficulty with this recall campaign you may contact the American Suzuki Customer Service Department for assistance using the direct Customer Service telephone line at 714-572-1490. Please have your vehicle identification number ready when calling. You may also leave a brief message at 800-444-5077 and a representative from the American Suzuki Customer Service Department will get in contact with you.

We deeply regret and apologize for any inconvenience this recall campaign causes you. We earnestly hope you understand that your safety, satisfaction and riding pleasure are priorities for Suzuki.

Sincerely,
American Suzuki Motor Corporation
------------------------------------------------------------------------------------
MOTORCYCLE / ATV DIVISION 4 - STROKE
ALT/LT BULLETIN NO. 86
DATE: 5/30/2006

SAFETY RECALL CAMPAIGN
LT-R450K6 QUADRACER ATVs
FRAME WELDING/REPLACEMENT
CAMPAIGN #2089

SUBJECT: RECALL CAMPAIGN - FRAME WELDING/REPLACEMENT
AFFECTED UNITS: EARLY PRODUCTION LT-R450K6 QuadRacer ATVs

REFERENCE: LT-R450 SERVICE MANUAL (99500-44060-03E)
ATTACHMENTS: CUSTOMER LETTER
NOTICE:

This notice is sent to you in accordance with the requirements of the Consumer Product Safety Act. Suzuki Motor Corporation has decided that a defect which relates to product safety exists
in certain 2006 model year LT-R450K6 QuadRacer ATVs. In cooperation with the U.S. Consumer Product Safety Commission, Suzuki Motor Corporation is conducting a voluntary Safety Recall Campaign for these ATVs.

STOP DELIVERY OF AFFECTED
LT-R450K6 QUADRACER ATVS IMMEDIATELY DO NOT DELIVER an affected ATV to a customer until you have completed, or verified completion of, the inspection/repair procedures outlined in this bulletin. It is American Suzuki policy that ALL vehicles affected by a safety recall campaign be correctedprior to sale or lease to a customer. You must verify this on the Suzuki "Certificate of Vehicle Pre-Delivery" form (99923-09823-006), which is to be completed for all new and used vehicle sales.

WHAT IS THE PROBLEM?

Suzuki Motor Corporation has determined that certain 2006 model year QuadRacer ATVs have a rear suspension cushion lever mounting bracket on the ATV frame that can break
under certain high-stress conditions. The rear suspension cushion lever, which connects the rear shock absorber and the ATV swing arm, is bolted to this mounting bracket. It is possible that very high stress from making jumps and landing with the rear brake applied can impart forces to the suspension lever mounting bracket, in the area around the bracket mounting hole, which can cause the mounting bracket to break apart. If the mounting bracket breaks apart, the rider could lose control of the ATV, possibly resulting in injury or death.

WHAT YOUR DEALERSHIP WILL DO:

Your dealership will inspect the frame to determine if it needs to be welded or replaced. If necessary, replace the frame assembly.

AFFECTED UNIT VIN RANGE:

* Indicates the check digit.
JSAAL41A*62100089 ~ JSAAL41A*62111626