Question about clip on needle jet!

[jchevy]

How do i know when it needs to be moved. I am running a uni filter and a WB e seiries slip on with 12 disks. I ve got a 155 main and the pilot screw out 2.5 turns. Plug is a brown color, not tan. Mid range power doesnt seem to be there. Do i need to lower the clip on the needle jet down 1 position? Elevation is about 2000ft.

[YZROOSTINYA]

you should be fine where its at. try a 152, put some holes in the lid.

also a 40 pilot

[atvmbaca]

try moving the clip to the fourth position which raises the needle I live in Az also and have the same mods as you and mine runs great lik,e this I also understand each quad is different also try removing your air box after you raise the needle,k my 2 cents