88 Top end with dome and piston kit, Stator cover

[kawi_rider_97]

I have a mint '88 stock style jug, it's .30 or .40 over. I have a Wiseco piston kit for it still in the box, it has just been rebored. Comes with the dome. The head has been ported and the cylinder is decked, my bike was one of the fastest stock jug 250Rs out there before I put the 310 on.

It's been sitting in the garage for months and has a little surface rust on the sleeve (NOT anywhere else, just a little bit on the top of the sleeve). You could probably just bolt it on and it would work fine anyhow but I'd run through it with a hone or some sandpaper first.

The stator cover is polished and in great shape.

100 shipped for the stator cover.

I'll take best offer on the topend. Don't bother with bullcrap offers.

[kawi_rider_97]

A couple pics. By the way, the rust came off with steel wool.

[kawi_rider_97]

2

[kawi_rider_97]

I also found the piston kit which is .030 over, so that's what the jug is at.

Keep in mind, THIS JUG HAS ZERO HOURS since the rebuild. I got an ESR 310, so I didn't reinstall this and I don't need this old jug anymore.

[TheNewn]

Don't want to be an *** or anything, but for that stator cover check this out.

http://www.eddie-sanders-racing.com/oscmax/product_info.php?cPath=2_44_19&products_id=36

you can get a brand new billet cover anodized red/blue/black or bare aluminum for 130 bucks.

So might want to rethink that 100 dollars shipped for the old scratched up cover.

[kawi_rider_97]

Eh, the pics make it look bad. It isn't scratched up, but the flash on the camera makes everything show badly.

I have another one that I just sandblasted and I'm gonna polish like chrome, I'll let this one go for 75 bucks shipped and if anyone wants to wait about a week I'll have the other one ready for 100.

[kawi_rider_97]

It's on eBay in case anyone wants to bid. Reserve is low at 250.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120236824897&rd=1