radiator hose location?

[j450rking]

i'm almost done with my build but i need to be sure were the radiator hoses run and were the hoses hook up for the overflow bottle. thanks

[deathman53]

what radiator do you have? Some, like mine have the inlet and outlet on the left side. Stock and most others, have the inlet on the left side(top corner) and the outlet on the right side(bottom corner). The hose for the overflow runs along the left frame rail to the container in the back. The overflow hose goes into the nipple below the radiator cap. If you have both sides on the left, I can give you picture of how its done.

[j450rking]

i have a stock radiator with one on the top left and the other on the bottom right. i think i have those right i just manly need to know the overflow. so the hose from the nipple under the cap gos to the small nipple on the bottom of the overflow? were dose the hose from the cap of the overflow go? and there is a small nipple that i think is the crank case breather right under the intake am i right or is it somthing else?

[deathman53]

the carb and crank case hoses just go long enough toward the ground, between the frame and swingarm.

[j450rking]

ok great thanks. it's all done now! now i just have to replace my mechanical seal and i'm done.

[86 Quad R]

good deal!!!!:cool: im ready to see pics :D

[j450rking]

here is a link to my post about the build. i'm going to get some detailed info on there within the next few days.

http://www.exriders.com/vbb/showthread.php?s=&threadid=336762