What Hubs?

[havinnoj]

Anybody know who made these hubs? Look to be billet.

[jrspawn]

Hard to tell by the pic, but they look to possibly be the Old Lonestar front hubs i believe. Im almost positive ive seen or had old LSR ones that were designed like that.

Thank you
Justin

[klutch]

Originally posted by jrspawn
Hard to tell by the pic, but they look to possibly be the Old Lonestar front hubs i believe. Im almost positive ive seen or had old LSR ones that were designed like that.

Thank you
Justin

Agreed they look like older LSR hubs.

[havinnoj]

I was thinking they were part of LSR's drag stuff for the R...

[jrspawn]

I think that was actually there basic design at the time, for drag or MX really.

Thank you
Justin

[jrspawn]

These are the ones i was talking about, i think they are the same as in your pic?

thank you
justin

[havinnoj]

awesome! now if I could find some

[jrspawn]

I might be able help you out there, might know where there are some at. Ill see what i can find and let you know.

Thank you
Justin

[baldwinmx450r]

Call up Lone Star Racing. Angela will help ya out! www.lsracing.com

[nickmelll]

wat do u need them to go on?? i work at a little parts store and i found them in parts unlimited for like 380.... if you want to get a set let me know and i could have my boss put them on ebay or something..

[havinnoj]

Originally posted by nickmelll
wat do u need them to go on?? i work at a little parts store and i found them in parts unlimited for like 380.... if you want to get a set let me know and i could have my boss put them on ebay or something..

I appreciate the offer and will keep it in mind. I need them for a tapered 250r spindle.

[nickmelll]

i looked at the book and it says the rear ones are tapered fit but it doesnt say anything about the front being tapered ??? so im not sure if they will work

[havinnoj]

Some spindles are stepped while one is tapered -- which will determine what bearings and/or if you need a race between them.

The "tapered lock rear wheel hubs" refers to how the hubs secure to the axle.

[nickmelll]

they have them listed as 86-87 250r , 88250r, and 89 250r but it doesnt say if they are tapered so i guess they would be as same as stock

[havinnoj]

The tapered spindle is either 88 or 89. You can't tell which spindle was what year. I couldn't get a firm answer from companies either. So I just make it known that I have tapered spindle shafts.

[vic425]

here ya go.....
http://www.rockymountainatvmc.com/productDetail.do?navType=type&navTitle=ATV+Accessories&webTypeId=17&webCatId=24&prodFamilyId=9284#vehicleSelect

[havinnoj]

awesome!

[vic425]

no problem and they got a pretty good price there....