OEM plastic

[D Bergstrom]

Can you still get 250R plastic from Honda? I know it is expensive, but I do not like the fit of the Maier plastic I have now. I am looking for white. Looks like the part numbers that I have found are as follows:

Front right: 61100-HB9-305
Front left: 61200-HB9-305ZB

Rear: 80100-HB9-405 or 80100-HB9-306ZB

I have found two for the rear, not sure what is white. They descriptions of all the above are followed by *NH138*. Is that the code for white? I would call a local dealer and ask them to run the numbers, but I do not trust any of them to get it right.


Thanks,

Doug

[D Bergstrom]

Well, I forgot about Service Honda. Figured I would post what I found out in case anyone else is interested. Called them and they said the 80100-HB9-405 number is discontinued. The other three are available but on back order. Of course, Service Honda as told me that before, then after a couple of weeks, I get a call that it has been discontinued. I also forgot to ask if those numbers are for white, but from the online digging I have done it looks like *NH138* is the code for shasta white. Price for all three fenders is about $550 (shipping NOT included, did not ask what shipping would be.) White Maiers are about $400 shipped from Rocky Mtn ATV. Guess I need to do some thinking.:D Factory plastic sure does look good though!

Doug

[EXtreme-]

for 550, you may as well get fullbore plastic in any color you want. Unless of coarse it's a restoration project. Then, you pay dearly.

[312R1]

Originally posted by D Bergstrom
Can you still get 250R plastic from Honda? I know it is expensive, but I do not like the fit of the Maier plastic I have now. I am looking for white. Looks like the part numbers that I have found are as follows:

Front right: 61100-HB9-305
Front left: 61200-HB9-305ZB

Rear: 80100-HB9-405 or 80100-HB9-306ZB

I have found two for the rear, not sure what is white. They descriptions of all the above are followed by *NH138*. Is that the code for white? I would call a local dealer and ask them to run the numbers, but I do not trust any of them to get it right.


Thanks,

Doug


405 is the white and the 306zb is 88 red. I can hook you up with a set of white if you would like.

-Steve

[312R1]

Originally posted by D Bergstrom
Factory plastic sure does look good though!

Doug




It sure does...I also have a set of Red still in the boxes waiting to go on. :devil:


http://i26.tinypic.com/1t6d74.jpg

http://i32.tinypic.com/28slmo1.jpg

http://i25.tinypic.com/j795cw.jpg

http://i26.tinypic.com/hrwpol.jpg

http://i26.tinypic.com/a3z5zl.jpg

http://i32.tinypic.com/w9wdac.jpg

http://i30.tinypic.com/2s0zn8j.jpg

http://i30.tinypic.com/esjhu9.jpg

http://i25.tinypic.com/kbas6x.jpg

[D Bergstrom]

Originally posted by EXtreme-
for 550, you may as well get fullbore plastic in any color you want. Unless of coarse it's a restoration project. Then, you pay dearly.

Not a restoration, but I am not big fan of the Fullbores (or Laker for that matter.) Do not really like the big scoops they put on the front hood portion, and I also want full fenders. (It says on there website Fullbore can do full fenders, but it is 6 to 8 week wait.)



Originally posted by 312R1
405 is the white and the 306zb is 88 red. I can hook you up with a set of white if you would like.

-Steve

Steve,

Is the 306zb red, or the 306za red? I looked up the numbers, and 88 rear is 80100-HB9-306ZA *R134*, while the 89 rear is 80100-HB9-306ZB *NH138*. I thought the NH138 code was white, and the R134 code was red.

Your quad (Very nice quad by the way, I was watching your build thread.) is pretty much the same color scheme I am going with, white plastics and black frame, arms, etc. Same colors that my 450R desert racer has been the last two years. Is the set of whites you have new or used? (Not really looking for used.)

Doug

[312R1]

Originally posted by D Bergstrom





Steve,

Is the 306zb red, or the 306za red? I looked up the numbers, and 88 rear is 80100-HB9-306ZA *R134*, while the 89 rear is 80100-HB9-306ZB *NH138*. I thought the NH138 code was white, and the R134 code was red.

Your quad (Very nice quad by the way, I was watching your build thread.) is pretty much the same color scheme I am going with, white plastics and black frame, arms, etc. Same colors that my 450R desert racer has been the last two years. Is the set of whites you have new or used? (Not really looking for used.)

Doug



Thanks!

Here are the part number that are on my OEM red that I have..the rear is 80100-hb9-306za, front right is 61100-hb9-306za and the front left is 61200-hb9-305za.

Your correct on the codes..the white set would be new.

-Steve

[AB250R]

ARE YOU TRYING TO SELL THOSE PLASTICS ON THAT R IF SO LET ME KNOW HOW MUCH ASAP....

[312R1]

Originally posted by AB250R
ARE YOU TRYING TO SELL THOSE PLASTICS ON THAT R IF SO LET ME KNOW HOW MUCH ASAP....



Nope, there not forsale.

-Steve

[AB250R]

WHERE CAN I FIND A WHITE SET LIKE TAHT I HAVE A REAL NICE SET OF RED PLASTICS TO TRADE FOR SOME