blaster/ banshee axle

[ni9inchnailz]

looking to make my blaster wider.goin with +2 a arms. wondered if banshee axle is wider and will be around the width id want?also will my blaster hubs and everything bolt up?

[mac_ando]

The banshee axle is about 2 " wider than the blaster. so it will work out just fine. + if u use the banshee hubs u can use a 9 " rim, witch gives u a bigger choice of tires that u can get.

[mc_racer]

On my 04 Blaster with disk brakes, it was a direct bolt in. No other parts were needed other then the axle. I don't know if it's that easy on a Blaster with drum brakes. Also, I think it was closer to 3 inches wider.

[ni9inchnailz]

kool thanks for the replys guys.are u saying 2-3 inches wider overall or each side.i was going to go with +2+1 a arms.will the front be wider if i use just a banshee rear axle. ideal is the same correct or is it better to have wider in the front?also i have the drum brakes so hopefully that not a problem or ill keep look out far banshee brake swap as well

[Dinner]

A stock Banshee axle is 36 1/2 inches from tip to tip. And the brake is a disc brake set up.

Here is a picture of the disc on a Banshee axle if it helps:

http://i25.photobucket.com/albums/c88/Yama_Shee/87%20Banshee/Banshee35-1.jpg