2006 400ex Head Torque

[2006-400ex]

2006_400ex 2006_400ex
New User | Posts: 1 | Joined: 03/08
Posted: Today 02:12 PM

my head gasket was leaking.. so i took it all apart.. cleaned it all good ordered now head gasket.. plus a new axle since i bent last one jumpin a 60ft double.. yummy.... but ya.. whats the torque's for all the bolts? know there are 3 Longer bolts.. 2 same size... those are by the sprk plug... and all the rest are shorter sized bolts all same.. wondering what the torques for all of these bolts were...

[JOEX]

Originally posted by 2006-400ex
2006_400ex 2006_400ex
New User | Posts: 1 | Joined: 03/08
Posted: Today 02:12 PM

my head gasket was leaking.. so i took it all apart.. cleaned it all good ordered now head gasket.. plus a new axle since i bent last one jumpin a 60ft double.. yummy.... but ya.. whats the torque's for all the bolts? know there are 3 Longer bolts.. 2 same size... those are by the sprk plug... and all the rest are shorter sized bolts all same.. wondering what the torques for all of these bolts were...
That's actually sounds like the valve cover (head cover)...

All the little ones that use the 8mm socket are 80 in-lb

The bigger one in the middle is I think 17 ft-lb

[2006-400ex]

most of them are all 8mm bolts.. theres a 10mm i think in the middle.. ya this is the valve cover.. cause the part i took off had the 4 big covers for adjusting the valves.. but i found a chunk missing off the gasket near front left side where i noticed the leaking.. there are abunch of small bolts.. like 8-9... which get 80in torque.. 3 really long bolts.. 17ft torque.. theres 2 thats a little smaller than those 3 big ones tho... they get 17ft too?

[JOEX]

Only the one with the larger head is 17 ft-lb. ALL the rest are 80 in-lb.

[2006-400ex]

noticed w hat you had said after iposted the reply .. lol ty for info.. gasket kit and axle should be in on Tuesday.. cant wait to rip it up... maybe get some pics of the new track nearby... 60ft double.. yummy