How do I install a pro armot kill switch?

[400exrapes]

I know there supposed to be one wire to the ground and one wire somewhere else but im real confused where both spots would be good. If you guys could post some pictures of where you put your wires and how you did it then that would be great.

[quad2xtreme]

I used the same wire that was used for the factory killswitch. I bought a killswitch for a Kawi motorcycle (2 wire) and use that as my starter button.

[bloodmoney23]

i did the same thing, i just tied it into my factory killswitch wires so i could keep my factory killswitch as well. Unless im racing and its mandatory I never use the tether cord anyway.

[shipwash]

i ran my ground wire under the hood and attached it under one of the mounting bolts for the headlight assembly. Then i ran the other wire into my factory killswitch, just by splitting the black wire wrap that bundles the wires together and splicing into the ground for the kill switch ( also black ).

[400exrapes]

sounds good, i'm going to attach one wire to the ground and then take the other wire and attach it the the black wire going into the stock killswitch and lights. But i actually would want to take that entire box off i feel like i would like the feeling with one off the handlebars.

[400exrapes]

any body have pictures?

If i'm not mistaken Pro Armor sells a kit to hook up their kill switch and its supposed to be way easier without having to split wires and such. But it might be another $20 :/

[400exrapes]

yeah if i just do what all these other guys did which was to connect it to the stock kill switch wire i should be fine

Did you sell the 400ex for the 450r? How do you like it?

[400exrapes]

can somebody get me a picture of how they have theres setup?

[400exrapes]

does it matter which wire goes to the ground and which wire to the factory black kill switch ?