New Owner! 08 TRX90EX

[4xfreak]

Just got my 9 year old boy an 08 white TRX90EX. I decided to go with the Honda because I want him to learn the basics of a manual trans plus they have excellent resale value.. We've only had it for a couple days but so far he's doing real good. Can someone post up some sites where I can find aftermarket parts for this little quad? Thanks

[3inthedirt]

No sites in mind but I do have some suggestions. If he is jumping, the tires will become too bouncy. You may want to try Razrs or something equivilant. For more power, pipe and jet it and put a UNi filter in. We have a FMF pipe on ours and it was a big difference. Also shocks will become a problem. Best if you go with a dual A arm set-up but the very least you should do is upgrade the shocks. We went with Works.

That should keep the little guy happy for a while.

[RAWDAWG635]

Here is a place you can get anything you want for a trx90.
www.icracing.com

[etondaddy]

Originally posted by 4xfreak
Just got my 9 year old boy an 08 white TRX90EX. I decided to go with the Honda because I want him to learn the basics of a manual trans plus they have excellent resale value.. We've only had it for a couple days but so far he's doing real good. Can someone post up some sites where I can find aftermarket parts for this little quad? Thanks
First of all congratulations....... check your pm's…. here's a sneak peak of Kyle's front end from DC.

Mike Kozura


http://i58.photobucket.com/albums/g278/etondaddy/cdfront.jpg

[4xfreak]

Thanks Guys.. Front end's lookin good etondaddy..

[etondaddy]

Thanks........... Dave has all the Honda stuff in his computer now just give him a call and he can start making them. Kyle has the first set of DC Honda suspension parts.

Mike Kozura

[3-D Racing Dad]

Another company that's been building trx 90 parts for quite sometime is profabonline.com if the stuff you need isnt on the site just give him a call he can get anything you need.

[etondaddy]

There's a few out there....... Profab (Fincher), ATV Four-play, Dave Carter, and I'm sure some that I don't know. Don't be afraid of DC because he just started to make them..... Dave’s products have proven them self’s over the years. I believe it's all about the weight......... and I can't see any advantage to being any wider than 44" on a mini. All the stuff I’ve seen for the trx90 has been big and heavy. Dave's swing arm takes the 44" Dominator axle made for the DRR and the a-arms are just about the same as the DRR. Kyle's is going to be a little skinner and little lighter ……I guess we'll see how it works out.

Mike Kozura

[3-D Racing Dad]

Not saying anything bad about Dave by any means. Just letting them know about other manufacturers that are out there. We dont have a problem with weight and most of the top running TRX's are running the profab setup along with an SCR motor.But it's all about who you feel comfortable with.


Jason Dye

[RAWDAWG635]

Does DC have a website yet? How can I get in touch with them?

[RAWDAWG635]

Nice looking TRX 3-D.:D

[etondaddy]

Originally posted by RAWDAWG635
Does DC have a website yet? How can I get in touch with them?

Try E-mailing him at dcarter@tcworks.net ..no web site yet. Or pm Kevin Smitley (mxdad423)

Mike Kozura

[etondaddy]

Originally posted by 3-D Racing Dad
Not saying anything bad about Dave by any means. Just letting them know about other manufacturers that are out there. We dont have a problem with weight and most of the top running TRX's are running the profab setup along with an SCR motor.But it's all about who you feel comfortable with.


Jason Dye
Yes sir Profab's great stuff......... Scott builds a dam good motor. I put my trust in Mcvay and Carter.......... I think we'll be fine. I just want to start building.


Mike Kozura

[azextreme]

heres my full profab build! still in the works!

[double d 1]

is that the gpx 150 in a trx frame? im sure you seen my threads at planetminis. how does it run?

[3-D Racing Dad]

Originally posted by RAWDAWG635
Nice looking TRX 3-D.:D


Thanks!! that is accually a picture from last year, but the quad hasnt changed any. Kyle won a WPSA moto last year on that quad so all we did was freshen the motor and replace some critical parts..

[3-D Racing Dad]

Originally posted by azextreme
heres my full profab build! still in the works!


Thats a good looking machine!!!!

[3-D Racing Dad]

Originally posted by etondaddy
Yes sir Profab's great stuff......... Scott builds a dam good motor. I put my trust in Mcvay and Carter.......... I think we'll be fine. I just want to start building.


Mike Kozura



LOL I know what you mean by wanting to get started building. When I tore this thing down to the bare frame last year It wasnt pressure from me getting it done it was from my 12 year old......LOL he was harder to work for than the guy that pays my check to me every week.......

Jason Dye

[etondaddy]

Originally posted by 3-D Racing Dad
LOL I know what you mean by wanting to get started building. When I tore this thing down to the bare frame last year It wasnt pressure from me getting it done it was from my 12 year old......LOL he was harder to work for than the guy that pays my check to me every week.......

Jason Dye
My frame, a-arms, and swingarm got shipped last night I should have them on Tuesday......... yep-eeeee. Kyle's 12 and driving me frickin crazy. He's going to have to race the first two PAMX quad series races on his e-ton in the shifter class he's pissed but what can I do. Here's a couple of rear end mock up pics from Dave
http://i58.photobucket.com/albums/g278/etondaddy/dcrear1.jpg

http://i58.photobucket.com/albums/g278/etondaddy/cdfrear.jpg

[blazen582]

Here is a picture of one that we are building

[blazen582]

More pics

[blazen582]

how do you guys get more than one picture on the same reply?

[etondaddy]

Looks great keep the pics coming.

To post more than one in a single post you need to upload your pics to photobucket they need to have a web address then copy and paste the url into your post in img brackets. On photobucket just click on the last line under your pic and the url in img brackets is copied and all you have to do is paste it in your post. Here's some pics of the powdercoating we did last night.... right click on these pics and go to properties and you'll see where they are stored.

Mike Kozura

http://i58.photobucket.com/albums/g278/etondaddy/100_0955.jpg

http://i58.photobucket.com/albums/g278/etondaddy/100_0945.jpg

http://i58.photobucket.com/albums/g278/etondaddy/100_0913.jpg

[azextreme]

Originally posted by blazen582
Here is a picture of one that we are building

What size of motor is this?? And did you mount the motor through the swing arm bolt??

[blazen582]

The engine is a cr 85.. The rear swing arm is a KOQ's.. But the rear mount of the engine is not using the swing arm bolt. I made different brackets for the rear engine mount. I did not have 3400.00 for a JB frame!!


David

[RAWDAWG635]

Originally posted by blazen582
The engine is a cr 85.. The rear swing arm is a KOQ's.. But the rear mount of the engine is not using the swing arm bolt. I made different brackets for the rear engine mount. I did not have 3400.00 for a JB frame!!


David
Where did you get them front motor mounts? They look good.

[RAWDAWG635]

Originally posted by azextreme
heres my full profab build! still in the works!

Nice looking TRX, awsome wheel and tire combo. I built one with a OGM 125 pitbike motor with a 146 kit, runs real good. Built it for the outlaw tracks. Dont have any pics when it was all together, Im redoing the frame right now.

[blazen582]

"Where did you get them front motor mounts? They look good"

The front mount are 400ex mounts.

[ROBBSRACING]

Ive got a few tricks for the TRX's too.


http://www.robbsracingengines.com/sitebuilder/images/DSCF0026-197x171.jpg

http://www.robbsracingengines.com/images/DSCF00022.JPG

http://www.robbsracingengines.com/images/DSCF00053.JPG

http://robbsracingengines.com/images/100_9585.JPG

http://robbsracingengines.com/images/766856313108_0_BG.jpg

http://robbsracingengines.com/images/236386313108_0_BG.jpg

[etondaddy]

Holy sh*t Robb you need to down size them bad boys.......... lol....looks great …your stuff is definitely proven. Hey take care of McVay he's got my motor :devil: :devil:

Mike Kozura

[blazen582]

Well still waiting for rear tires.. !

[blazen582]

Another

[blazen582]

Side

[national #9]

That KOQ RACING stuff looks pretty sweet on your quad, I hear they have alot of good stuff for the trx 90's and have a couple of 90 mod styles too.

[blazen582]

Thank you.. KOQ's stuff is great, plus Tom took time and helped me with all questions!