PDA

View Full Version : Clutch has mind of its own



SmokeyJohn
03-01-2008, 02:14 PM
Hi, i put a new EBC clutch kit in my atv that is new friction plates and steel plates and springs. My clutch is a change clutch and a centrifugal clutch cause i have a 88 honda 300 4x4 its semi auto. it likes to shift down on its own also its hard to shift sometimes i cant even shift. whats wrong?ps. every since i put the clutch in it has shifted by itself.

kevinc85
03-09-2008, 03:42 PM
try adjusting the (clutch paly screw) on the right side of the motor they way i adjust it is engine runnng with you holding the shifter up so its neutral and turn screw tell you feel drag or its starts to move forword the back off a 1/4 turn then tightin jam nut.