rear sprockets

[whc]

where can I get 40 41 or 42 teeht rear spockets?? would like 1st gear to be a touch lower, currently 14/39. I do not want to use a 13 front. chain would be rubbing on swing arm and would probaly be geared too low. any help is a pre she ate ted. thanks Mild Bill

[frenimy]

Most any aftermarket stores should carry what you are looking for but you can try chaparral-racing.com rockymountainatv.com

[440exadee]

i got my 41 and 43 from sprocketspecialists.com

[JOEX]

Atvriders.com site sponsor C&D Racing (http://www.exriders.com/vbb/forumdisplay.php?s=&forumid=36)

[TRXRacer1]

I'm running a 13 front with no problematic rubbing on the swingarm.

[wcbomb]

if you are thinking about the bigger rear 42 tooth sprocket it will probably rub the rear skid, could use washers to shim it away from the swingarm, 3 teeth up on rear equals 1 down on the front.

[drew416ex]

I thought it was 2 on the rear equals 1 up front

[Gatekeeper]

Just bought a new front. 1 down in the front=approx 3 up in rear
38/15=2.533 stock
38/14=2.714 down 1 frt
41/15=2.733 up 3 rear

[400funex]

I have a 41t (13t front too) and I love it. I mostly ride in the sand so the low gearing is nice to have. I got mine because I wanted to try and close the gap between 2nd and 3rd, it helps a little. As far as top speed my GPS tells me I can do 53.5 mph with this set up.