cracked frame

[One_Bad_400]

ok fellas... my frame cracked on the right side a wile back and the crack was only a few cm long so i welded it right up and has held... so today after done ridding i look at the other side and noticed frame was cracked all the way around.. how have ya'll welded ya'lls frames up without tearing the hole bike apart?!?! its in a same spot as all, back part of upper engine mount

I took off my tank and plastic piece under it. I also removed the rear plastic. then I took a piece of 1" ID steel pipe about 14" long and split it down the middle. Then I pounded it around the frame and welded it in place. That was about 18 months ago. I had to reweld one spot since then. Good Luck