clip position

[#17YFZRACER]

i searched the sticky but didnt find anything. i have the stock exhaust drilled out, air box lid off, 162M jet, 48P jet, the elevation is around 800ft, temp is about 40ish. what position should my clip be on? any help would be nice.

do you have the stock needle or the ncvq ? it should be around the 3rd or 4th if you need an ncvq needle i sell them on ebay. just type in ncvq needle in the search and you will find them. scrimmy69 id my ebay username. if you need any parts i get them cheap so just let me know. thanks jim

[#17YFZRACER]

yeah i already have the ncvq needle on the 4th position. it has some trouble idling sometimes dont know why!?!? but if i need anything else ill let you know.

try running a 45 pilot

[stic]

i got the gt thunder kit.it has the 170 main,50 pilot,50 leak and ncvq needle(4th position).runs/idles good and its 30 here.im sure itll run better when its 80.