eton 90 wiring problems

[maweegeordie]

Hi my son has a eton vipre 90 i stripped it completly to get the frame sand blasted and powder coated, i have rebuilt it but removed all excess wiring and am stuck how to rewire the basics to the cdi and ignition please can any one help thank you.

[etondaddy]

PM me your phone number and I'll call yea I got vonage it's free we'll fix yea up.


Mike Kozura

[markvette]

here you go i posted this on another forum about a year ago. many have used it with success. i even seen a while back where someone here copied and pasted it here for someone.

coil
2 wire plug
orange--------to positive side of coil
black-----------to negative side of coil if 2 wire coil, if one wire coil to frame ground
black/white stripe............frame ground
black/red stripe------------plug into same color wire from stator
white/red stripe-----------plug into same color wire from stator

stator
3 wire plug
only use the black from this plug to a frame ground, tape off other 2 wires
black/red stripe----------------to cdi
white/red stripe...................to cdi