Works Triple Rates W/remote Rezies-durablue Axle

[TRXman86]

I have a set of ST Works triple rates w/ remote rezis up for sale along with a durablue stock length axle. The axle has the sprocket hub as well. The shocks are in good shape but will need a lower spacer made or ordered. If anyone knows these shocks, the spacer is the little "T" looking piece. Hard to explain but easy to make. Rezis and body are clean, shafts have a few very small dings but are not big enough to mess with seals or anything. Valved around a 170-190 rider. They are also for +2 arms. Will work on a 450r or a 400ex. Asking $200 shipped

The axle will need some polishing up. I have never had it on the quad. I bought it off a buddy of mine who took it out of his EX. It is straight. Besides needing cleaned up, it's ready to bolt in. Castle nuts included. Asking $100

I take PAYPAL, money order, or cash in hand(of course :D) If using Paypal, please include 3% for fees. I will have that price below so ya know:
SHOCKS W/ PAYPAL= $206
AXLE W/PAYPAL = SOLD[/B
If the fee's are not added at time of reciept, payment WILL be returned!!!

[B]PICS BY E-MAIL ONLY FOR THE SHOCKS I will have pics of the axle later tonight if anyone is interested.

I also have some front calipers for a 400EX. They will need one pin to hold the pads in place. Lines included to the single down line off the bars. Work good! $90 shipped

I will also have stock arms, shocks, tie rods, and maybe spindels for sale later on. I am not sure If I will be selling yet or not. Depending on how much interest I get. Everything is in good shape, shoot me an offer for ALL OF IT and I may sell if price is right. Pics of the front end upon request. Everything is still mounted to the quad.

For pics, send e-mail to ryan_moore_86@yahoo.com

[TRXman86]

Pic of the shocks. I should have pics of the axle and calipers up tomorrow.

http://img.photobucket.com/albums/v94/atvmxrcr86/shocks1.jpg

[TRXman86]

TTT

I will have pics of the calipers up shortly along with the stock front end. The shocks have around 15-20 hours on them. Still nice and plush. Arms, rods, and shocks will sell together, WILL NOT SEPERATE!!!

Best pic I have of the front end:
http://img.photobucket.com/albums/v94/atvmxrcr86/miscnew004.jpg

[TRXman86]

Calipers:
http://img.photobucket.com/albums/v94/atvmxrcr86/others002.jpg
i will get a pic of the axle tomorrow. I was going to get it today but a friend got in a car wreck and I was at the hospital all day.

I also have a fairly new UNI filter. Like to get $25 shipped. Comes in a K&N box pre-oiled ready to clamp on.

[TRXman86]

AXLE SOLD

TTT

[TRXman86]

TTT $200 shipped for WORKS or trade for +1 stem/clamp or Propeg nerfs with good nets. I'll even include a pair of red HONDA shock covers.

Stock caliper in great working order w/ all lines $110
stock calipers with cross line (needs 1 pin to hold calipers) $80
Stock arms (all 4) paint wore off bottoms from XC/trail rides $100
Stock tie rods w/ ends $50
Stock shocks in good shape $90
Stock pegs $15
DG Steel series nerfs good nets(mounts to pegs) $90
Stock polished levers (NO FRONT REZI, JUST LEVERS) $15
250r Race Tech rear stock shock-valved for MX @ 170lb rider $200
UNI Filter $25
Older K&N Filter-free if ya buy the UNI Not the best of shape but will work if ya need a spare...

[deichenlaub2]

What year and model are the shocks for $90.00?

[TRXman86]

They came off of my 02 400EX. They will work on any 400 from 99-04 and should work on the newer ones to...

[TRXman86]

TTT

I also have a set of ITP T-9 Pro series wheels. 9x9 3+6 offset. Will take $90 shipped. I'll get pics of them as well if anyone is interested.

I think I have a clutch cable also. I'll have to look. Anyone needing one?

[TRXman86]

SALE PENDING ON SHOCKS

TTT

[TRFOXX]

I need a clutch cable I can pay through paypal! PM sent!

[TRXman86]

No clutch cable, I had to use it cause mine broke.

Add to the list:

Stock front brake lines, from rezi to calipers-NO BANJO NOLTS! $25 shipped

Steel braided lines for front, from calipers to rezis (SINGLE LINES) These are the ones you will need to get a dual hole banjo bolt for. $50 shipped (have a few small wear spots from being zip-tied to arms.)

Stock headlights, one lower tab is broke. I havent looked very close at them to tell anymore. Will find out tomorrow for sure. Lights work GREAT! $25 shipped

Older style trail tech lights, where the lights mount to the bar mounts, they are a little loose but hold great. Used them at the 12 Hour and had planty of light w/ stockers. $30 shipped (need to be mounted to crossbar slots, simple install)
*******************************************
TTT $200 shipped FIRM for WORKS or trade for +1 stem/clamp or Propeg nerfs with good nets. I'll even include a pair of red HONDA shock covers.

Stock caliperS in great working order w/ all lines $100
stock calipers with cross line (needs 1 pin to hold calipers) $80
Stock arms (all 4) paint wore off bottoms from XC/trail rides $100
Stock tie rods w/ ends $45
Stock shocks in good shape $80
Stock pegs $10
DG Steel series nerfs good nets(mounts to pegs) $80
Stock polished levers (NO FRONT REZI, JUST LEVERS) $10
250r Race Tech rear stock shock-valved for MX @ 170lb rider $185
UNI Filter $20
Older K&N Filter-free if ya buy the UNI Not the best of shape but will work if ya need a spare...
I also have a set of ITP T-9 Pro series wheels. 9x9 3+6 offset. Will take $80 shipped
**I MIGHT sell my Razr2's also. They have a few small thorns from trail riding but no leaks/holes. Fronts are on stock wheels. One is bent, other is straight. Rears also on stock wheels, both straight. Fronts have plenty of rubber left and can see here:
http://img.photobucket.com/albums/v94/atvmxrcr86/miscnew004.jpg
Will get pics of rear if anyone is interested. Willing to seperate fronts from rears, but NO DISMOUNTING. Wheels will be included!!! Make me some offers, I will laugh at $80 bucks...

[TRFOXX]

Send me a pic of the trail tecs!

[TRXman86]

Here is a link to them, best one I have. Some surface rust from where I washed it, but should be able to scoth brite off and polish. Some of the stuff selling on here is in my sig.

http://img.photobucket.com/albums/v94/atvmxrcr86/frontnew.jpg

[TRXman86]

I also need some ball-joints for EYEBALL ARMS!!! ASAP!!!!! Willing to do trades to get some. MUST have good boots and straight!!!

[TRXman86]

Any ball joints will work. I got looking, I need a top and a bottom.

TTT Make me some offers, I need this stuff gone NOW!!!

[TRXman86]

Bump

May entertain about ANY offer!!!

[TRFOXX]

Your not selling those nerfs are you?

[TRXman86]

Not the ones on it now, But I have a set of DG nerfs that bolt to the pegs. The ones on it are for a 450 and you'd need U-bolts where they cross under the motor. They need nets also. i have my dealer trying to find me some but they are dis-continued... Pain in the ***...


Shocks sold!!! PENDING PAYMENT

[TRXman86]

TTT

NEED SOME OFFERS

[TRXman86]

ALL PARTS STILL AVAILABLE!!!! EVEN SHOCKS...

THESE NEED TO GO NOW!!! MAKE SOME OFFERS, I'LL SHIP SAME DAY PAYMENT COMES IN!!!!!!

FIRST OFFERS TAKES IT!!!!!!!!!!

will the shocks work on an 07 450r?

if they do i got dibs

[TRXman86]

Yea they should work on it. I had 450 shocks on it before, so they will fit. They need 1 spacer for the bottom though. Like I said in first post, one can be made for very little at a machine shop. I will take $160 shipped for them. And yes, they do work great. I borrowed a spacer from a friend and had them on testing them to make sure they were good. Still very much plush!

i will have pics of the RAZR2's up later on today (Monday). They are a little dirty but WILL be cleaned up before shipped.

i pm'ed you about the shocks bro =P

[TRXman86]

WORKS TRIPLE RATES SOLD!!!!!!!!

THANKS to 450r_mayhem. PM replied to... Let me know as sson as ya can with that. PM me your address also.

MAKE OFFERS on it ALL. I have pics of the RAZR2's ready to post up. But I dont have much time to do it right now. As I said, they need cleaned up and will be done before shipped out. So whoever wants them, wheels and tires, or just wheels... I need all this gone ASAP!!!


Open to trades also... I now need a new complete clutch ASAP!!!

[kaotik1]

Are the tires front and rear? How much tread? What are you looking to get for them if they are front and rear.

[TRXman86]

Tires MAY be sold, but I'll let ya know. Here are some pics of the tread on them. PM me an offer though...

Rears:
http://img.photobucket.com/albums/v94/atvmxrcr86/31608055.jpg

Fronts:
http://img.photobucket.com/albums/v94/atvmxrcr86/31608056.jpg

[TRXman86]

Shocks still available. Last kid backed out... BE SURE AND READ PAGE 1!!!

$160 shipped!!!

[TRXman86]

RAZR2'S SOLD!!!

Everything else is still up... MAKE SOME OFFERS!!! YOU'D BE SUPRISED!!!!

I will trade for some parts I need also:
+1 stem
MX tires (RAZR MX or Holeshots) for 9" or 10" rear wheel
Nerf bars-REAL BAD LIKE!!!
Or anything really...

[TRXman86]

REAR HUBS SOLD
WORKS SHOCKS -POSSIBLY GONE-

I still have a complete stock front end. Hubs, spindles, calipers, shocks...etc... Will sell it all fairly cheap or trade it. Make some offers. I also have stock bars w/ red plastic, stock levers (only clutch lever-no rezi) and brake lever. Ask me, I may have it...

DG nerfs are bent on one side pretty good and one peg is broke on the weld. I don't want to sell them cause there junk... But I will sell the nets and stock foot pegs if anyone wants them. The piece that's broke is the mount that fits behind the foot pegs, NOT the foot part...

NEED THIS STUFF GONE ASAP!!!

[Rasjia]

What shocks do you still have also what size are they

[TRXman86]

I have stock shocks, and a set of WORKS triple rates for +2 arms. What length I am not to sure.

Here is a pic of them again and the stock front end still on the bike:
http://img.photobucket.com/albums/v94/atvmxrcr86/shocks1.jpg

http://img.photobucket.com/albums/v94/atvmxrcr86/frontnew.jpg

[TRXman86]

TTT

Make offers!!!

[yfz3x]

sorry it took so long pm'd you back just need your paypal

[TRXman86]

replied. Hope ya buy them. I need this stuff GONE!!!!

[yfz3x]

just sent the money tonight ---paypal..
check your e-mail.thanks

[TRXman86]

WORKS SHOCKS SOLD TO "yfz3x"

THANKS!!! Will be shipped Monday.

TTT Rest needs to go NOW!!!

[TRXman86]

TTT

[TRXman86]

BUMP

MAKE OFFERS!!!!

[TRXman86]

TTT

[TRXman86]

I just moved to a new home. Will take ANY offers!!!! EVERYTHING MUST GO NOW!!!!!!!!!!!!!!!!!!!

Give me a price.

[TRXman86]

TTT

I have a set of RAZR2 rears to get rid of also. On stock wheels with around 50-70% left. Hold air fine. Shipping is around $30 bucks. So shoot me a good offer with that 30 added.

Here is the best pic I have of them.
http://img.photobucket.com/albums/v94/atvmxrcr86/31608055.jpg

[TRXman86]

RAZR2's, Stock front end, SOLD

TTT

MAKE OFFERS!!! I NEED THIS ALL GONE!!!

[TRXman86]

complete quad and parts SOLD for $3000

[wilkin250r]

Post an updated list, and prices.

[kfxnut]

how much for the dg nets shipped to 27009 thankyou

[TRXman86]

complete quad and parts SOLD for $3000

[TRXman86]

ALL PARTS ARE SOLD!!!!!