Cody_300ex
02-18-2008, 08:42 AM
GDH Racing +3.5 Longtravel A-arms - Powder coated bright Red, Accepts 400ex length shocks or YFZ shocks The PC is in average shape. Very strong and rare a-arms, Like 1 of 15 pairs, if that. With 2/3 offset wheels it is right at 49.5 and lowered down for TT Its right under 50 Inches. I have owned them since about April of last year. They also have special mounts for a swaybar. Also if you get a Shock relocator you can run 19.5 and 20 inch shocks on it depending on the relocator. In my opinion and from my experience when these a-arms are mated with the right shocks it can't be beaten, it's the best front end on the market for the 300ex. Shoot me an offer
Ricks Hot shot CDI - Works great on any semi-modded 300ex motor, used it for about six months. It still works, tried it on a friends 300ex not long ago. 40 bucks shipped
Frame- Pretty good frame, no cracks or breaks, structurally sound. Needs a PC or paint job. No title but I do have the bill of sale. I Will Rubber coat it for an extra 35 bucks. Make Decent Offer
Stock rear shock - Good shape, not blown. 45 shipped.
Stock Gas tank W/ Polished Gas cap - Nice shape, not any leaks. There is one dent at the very top of the tank. Some slight wear on the paint but very structurally sound. Comes with the petcock and the plastic peice used to adjust it. Make Offer
Stock Rear Plastic w/ brace - ok shape, has a few white spots, and quite a few scratches. No cracks or breaks tho. Red. 75 + shipping
Stock steering Stem - Straight, good shape, will include polished Handlebar clamps & bolts. 65 shipped
White 250r race cut front Fenders w/ red hood - Hood is in great shape but the Fenders are about shot. Good structural Shape but just rough looking, would look fine with a little bit of sanding. Will include the adapters to put on a 300ex. 35 + shipping
Durablue Rear lowering kit - Comes with all hardware, in good shape. 40 shipped
Complete Brake system Front only - Extremely good pressure, decent pads, no leaks what so ever, No bleeding needed. Comes with SS front brake lines, Calipers, rear lines, Both master Cylinders, everything, even the rotors if ya want em - MAKE OFFERS!!
Footpegs - Painted with 2 layers of Rubbercoat, Freshly, sharpened, no cracks, good condition - 45 shipped
Full chain and sprocket set - A 13 & a 15 tooth front sprocket, a 38 & 33 tooth Rear sprocket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers
Stock Skid Modded Swingarm Skid Plate - Welded 10 gauge metal to it to strengthen it up, Rubbercoated black, looks like new. - Make offer
Front Hubs - I have three of them. Bearings and studs where replaced in two a year ago. The color is also in great shape also. - Make Offer
Stock Honda Throttle Housing - The Top is PCed chrome, The body is fire Red, and the clamp is prism Black. Very smooth, a little wear but not to bad. - 40 shipped obo
Stock 300ex Tie rods - Polished, straight where used for maybe one year. Never Bent. - 15 shipped
400ex Triple Rate Works shocks - One shock is fine, the other will need a shaft, spring retainer, rubber bumper, and the washers. The bodies have been polished. Works quoted me 75-90 bucks including labor to fix. - $65 shipped
Shoot me some offers on this stuff, It just sits in my basement taking up space.
Any Other part you can think of, Just ask, I will more than likely have it if it isn't already sold. I will consider trades expessially for LTR parts
You can call my Cell 1-270-210-8952 After 3:00pm about any parts for a 300ex you could possibly need. Also e-mail me at fastandthefurious67@msn.com
Just ask about anything else, I have a garage full of parts for 300ex's
Ricks Hot shot CDI - Works great on any semi-modded 300ex motor, used it for about six months. It still works, tried it on a friends 300ex not long ago. 40 bucks shipped
Frame- Pretty good frame, no cracks or breaks, structurally sound. Needs a PC or paint job. No title but I do have the bill of sale. I Will Rubber coat it for an extra 35 bucks. Make Decent Offer
Stock rear shock - Good shape, not blown. 45 shipped.
Stock Gas tank W/ Polished Gas cap - Nice shape, not any leaks. There is one dent at the very top of the tank. Some slight wear on the paint but very structurally sound. Comes with the petcock and the plastic peice used to adjust it. Make Offer
Stock Rear Plastic w/ brace - ok shape, has a few white spots, and quite a few scratches. No cracks or breaks tho. Red. 75 + shipping
Stock steering Stem - Straight, good shape, will include polished Handlebar clamps & bolts. 65 shipped
White 250r race cut front Fenders w/ red hood - Hood is in great shape but the Fenders are about shot. Good structural Shape but just rough looking, would look fine with a little bit of sanding. Will include the adapters to put on a 300ex. 35 + shipping
Durablue Rear lowering kit - Comes with all hardware, in good shape. 40 shipped
Complete Brake system Front only - Extremely good pressure, decent pads, no leaks what so ever, No bleeding needed. Comes with SS front brake lines, Calipers, rear lines, Both master Cylinders, everything, even the rotors if ya want em - MAKE OFFERS!!
Footpegs - Painted with 2 layers of Rubbercoat, Freshly, sharpened, no cracks, good condition - 45 shipped
Full chain and sprocket set - A 13 & a 15 tooth front sprocket, a 38 & 33 tooth Rear sprocket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers
Stock Skid Modded Swingarm Skid Plate - Welded 10 gauge metal to it to strengthen it up, Rubbercoated black, looks like new. - Make offer
Front Hubs - I have three of them. Bearings and studs where replaced in two a year ago. The color is also in great shape also. - Make Offer
Stock Honda Throttle Housing - The Top is PCed chrome, The body is fire Red, and the clamp is prism Black. Very smooth, a little wear but not to bad. - 40 shipped obo
Stock 300ex Tie rods - Polished, straight where used for maybe one year. Never Bent. - 15 shipped
400ex Triple Rate Works shocks - One shock is fine, the other will need a shaft, spring retainer, rubber bumper, and the washers. The bodies have been polished. Works quoted me 75-90 bucks including labor to fix. - $65 shipped
Shoot me some offers on this stuff, It just sits in my basement taking up space.
Any Other part you can think of, Just ask, I will more than likely have it if it isn't already sold. I will consider trades expessially for LTR parts
You can call my Cell 1-270-210-8952 After 3:00pm about any parts for a 300ex you could possibly need. Also e-mail me at fastandthefurious67@msn.com
Just ask about anything else, I have a garage full of parts for 300ex's