PDA

View Full Version : hrc



mtdewracing
02-14-2008, 12:54 PM
i have a stock 04 450r i put on a fmf power core 4 silencer and a hrc headpipe. do i need a hrc needle? FMF said i could use the stock needle with just the slip on. any help would be great.

ridding4fun
02-14-2008, 01:02 PM
Im not sure on to 04-05 needles , but on the 06-08 the engine goes lean just off of idle when you put a pipe on it. everone has told me to put a smaller leak jet and hrc needle to get better throttle responce. If your 04 is not bogging when you give it throttle, it will bo ok.

mtdewracing
02-14-2008, 01:04 PM
it will idle but when i give it gas it dies.

CSR400EX
02-14-2008, 09:50 PM
you can use the stock needle, but the HRC is a better needle. have you even put a bigger jet in after adding the exhaust??

mtdewracing
02-15-2008, 06:35 AM
i did not change the pilot jet.

400exrider707
02-15-2008, 06:56 AM
Where did you get an HRC headpipe for an 04? Honda doesn't make one.... the HRC headpipe is for 06+ motors....

mtdewracing
02-15-2008, 07:06 AM
oh ok. didnt even think about that. it bolts up just trying to get it dialed in if possible. thanks for everyones help.