Best place to connect kill switch?

[YFZRob]

I am adding a Pro Design kill switch to my 88 and I just wanted some opinions as to where to splice into for a clean install.

thanks!

[mfr422]

yfzrob,
Hook it in to your factory location for the key switch, it's in the connector under the gas tank. It should be two single wires with plug connectors one black and one grey if I remember right. Roost on!!!

[CorvetteZ06]

Originally posted by mfr422
yfzrob,
Hook it in to your factory location for the key switch, it's in the connector under the gas tank. It should be two single wires with plug connectors one black and one grey if I remember right. Roost on!!!

thats where I connect mine on all of my R's. its a black wire. i can take a pic if you like.

[YFZRob]

Excellent...thanks guys! I should be good to go now. So splice into this black wire at the black and grey connector under the tank, then ground the other end of the kill switch, correct?

[CorvetteZ06]

yes, ground the other wire. also, the black wire your looking for, should have a female conector at the end of it. Good luck man.