cam chain timing

[fox400]

hey can anyone please post a diagram for setting the timing after removing the cam and chain? i dont wanna screw anything up if i put it back together wrong.. thanks adam

[REPOMAN]

dont have a diagram off hand but just make sure the cam chain is on the bottom sprocket and the lobes on the cam are down. turn the crank till you are "TOP DEAD CENTER" by lining up the "t" mark with the line on the case. dont turn the crank the wrong way either or you will not have compression. dont forget the locktight

[fox400]

thanks alot man this will help me alot!

[REPOMAN]

need anymore help just let me know. i will help anyway possible