View Full Version : R pics
well, a few people wanted to see these, so i cleaned her up a lil, and took a few pics (if u look closely, on the left front rim, if ur sittin on it, has a large dent in it now from hitting a rock in 4th pinned, lmao
POS :p j/k that thing is coming along good!!, put some red fullbore on there now :)
lol, Fullbore = to expensive, and besides, look how crappy my plastic looks, thats what Fullbore will look like after MR. 440 uses it
Sparks425Ex
11-17-2002, 05:13 PM
Looks good
as of right now, i am attempting to trade for another stock 89 R frame, i think it might be reinforced, its PC'd black prism, rePC my hubs red, and do my motor mounts in smoke chrome or something, hope it wil look good when its done
EvilJester400EX
11-17-2002, 05:27 PM
it looks better outside of the garage.. nice R man.
it was a good ride, i bent my rim a lil, took a chunk of chrome out of my a-arm, crushed a dumb rock, my magura started leaking, and lost about half the fluid in the end of the day, twisted my ancle hittin that rock, all in all, great day
Ride400
11-17-2002, 06:12 PM
looks good, you need to attach ur front brake lines to the a arms
they are, by lil white zipties u cant even see barley, look on that tab on the left a-arm if ur lookin at it, u can see where it connects
Live2Ride300
11-17-2002, 06:25 PM
Nice R man, I like the added touch of the dice haning from the clutch lever side of the handlebars. How do you like ur hydraulic clutch? Is it alot easier clutch pull? Did you put a whole in the line ?
NTPracing22
11-17-2002, 06:32 PM
heres mine.
it's purdy
CAAAAMMMMMOOOOO
well, u see that lil mastercly thing by the case, i musta dinked that thing, cause it leaks slowly out of it, dripps on my stator cover, i like this clutch ALOT better than cables, pulls smoother, easier, and no cleanin cables, or lubing, jus filll it up with mineral oil
NTPracing22
11-17-2002, 06:42 PM
this is what it looks like now. it's only the primer though
are u takin the stem, stem bearings, and the b pedal off, dont want to PC that, lol
also, after hammerin through them whoopties, my reserve bottle broke AGAIN, even after my custom plastic welding, d@mnit
nice pics man, lets see some rosstin ones sooner or later, good job cleaning it up the crhome looks tight
i might be able to fire her up real fast, go out in this farmers feild, and throw a quick roost, not sure if my helmet is goin to dry though, i might get hanged if i post a pic with no helmet
tants
11-17-2002, 08:06 PM
not to shabby bean, it will be nothing compared to my R :D
lmaolmaolmao, correction, yours will be nothing compared to mine :D
Poncho
11-17-2002, 08:20 PM
Both of you hush. My banshee will be so badarse your R's will blow a head gasket over her.:eek:
haha, u might blow a gasket because u overheated cause my R roosted all over ur radiator!
300exazzkikr
11-17-2002, 08:40 PM
PRIMER!!..this is my frame when i redid it.
mine should look like that very soon
dude white frame??? go with black it will look much better! and stop trying to copy my quad and color's and motor lmao j/k, but are quads get more identical everyday, besides plastic and arms, and lil stuff u dont really see
LMAO, i mean stripped down like that, not white, im doin mine black, i want oppisite
NTPracing22
11-18-2002, 07:25 AM
I'm doin mine black also. it's already got a few coats on it..it looks good. i couldn't get my stearing stem out. lol. i took the bolt out from the bottom...but it won't pull out.
Maybe you or someone glued it on, j/k the bearing or seal is prolly shot or ur not strong enough:blah
knighttime
11-18-2002, 08:34 AM
up with those ghetto dice:confused:
stocktires
11-18-2002, 10:06 AM
mine was pc'ed black a week ago, lol
Bean, get that frame if you can, & if it isnt re-inforced............... then re-inforce it!
My R will put you ALL to shame, lol :D
NTPracing22
11-18-2002, 02:45 PM
Lathers Maybe you or someone glued it on, j/k the bearing or seal is prolly shot or ur not strong enough
is my bearing seal is shot, would it hold the stearing stem in to the point that me and a freind can't try to pull it out together?
those are my blingin truck dices, every cool person has those, i traded a blue set for the gold, and forgot to insert them in my truck
pull harder on that stem!
300exazzkikr
11-18-2002, 03:46 PM
This is what you do. Put the nut back on it so that no threads are showing. Not tight but at the end of the bolt. Get a hammer hit it lightly and it should pop out. It's almost pressed in there, it's a real tight fit. You put the nut back on so you don't screw the threads up when you hit it with the hammer.
good advice, i already know mine comes out, i tried it a few times, lol
NTPracing22
11-18-2002, 05:29 PM
we tried that...we started hitting it lightly...then worked up to hitting it like a mofo..all i need is a torch..i could get it out then. lol. but i want it in once piece
well, now i found ANOTHER problem n my R, my stator gasket is gone, on one of the boltholes, it is almost ate through, which would hav equaled another blown motor, glad i was in the polishing mood today
300exazzkikr
11-18-2002, 07:45 PM
wow..you got a problem there now don't ya...Hmmm...It should come out, unless something else is in the way. I don't know bro, sorry but i'm out of ideas.
try heating it up a lil, and packing ice around the frame to shrink and expand it till it moves
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.