Maxx Racer
02-11-2008, 05:21 PM
I'm rebuilding my bike and was hoping someone with a good knowledge of jetting could give me a starting point for my jets.
416CC 10.8:1 JE/ Cometic Steel XR400 89MM Gasket
Hot Cams Stage 2 Cam
Removed Air Box Lid
K&N Filter/Outerwear
Stock Pipe With Baffles Removed
Grinded the stock welds on the head pipe
My altitude is around 700-800 ft.
416CC 10.8:1 JE/ Cometic Steel XR400 89MM Gasket
Hot Cams Stage 2 Cam
Removed Air Box Lid
K&N Filter/Outerwear
Stock Pipe With Baffles Removed
Grinded the stock welds on the head pipe
My altitude is around 700-800 ft.